C1427 2014 Toyota RAV4 Code - Actuator Pump Motor Malfunction
Quick Answer
The Motor Relay and motor fail-safe relay are built into the Brake Actuator Assembly. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1427 2014 Toyota RAV4 indicates Actuator Pump Motor Malfunction.
- Common causes
- Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1427 2014 Toyota RAV4 Description
This DTC may be stored when the voltage to the motor relay power source is lower than the DTC detection condition due to low output from the battery or alternator.
What are the Possible Causes of the DTC C1427 2014 Toyota RAV4?
- Faulty Skid Control ECU (Brake Actuator Assembly)
- Skid Control ECU harness is open or shorted
- Skid Control ECU circuit poor electrical connection
How to Fix the DTC C1427 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1427 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1427 2014 Toyota RAV4 code?
Need more information on how to fix the C1427 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1427 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1427 2014 Toyota RAV4 Code
1. What does the OBDII code C1427 mean on a 2014 Toyota RAV4?
C1427 indicates an "Actuator Pump Motor Malfunction," meaning there is an issue with the brake actuator pump motor in the ABS system.
2. What are the common symptoms of code C1427 in a 2014 Toyota RAV4?
Symptoms include the ABS warning light turning on, reduced braking performance, and possible loss of traction control or stability features.
3. What causes the C1427 code to appear in a 2014 Toyota RAV4?
Common causes include a faulty brake actuator pump motor, damaged wiring or connectors, or an internal failure within the ABS actuator assembly.
4. Can I drive my 2014 Toyota RAV4 with the C1427 code?
It is not recommended to drive with this code active, as it may compromise braking and traction control, increasing the risk of an accident.
5. How do I fix code C1427 on a 2014 Toyota RAV4?
Repairs may include inspecting and replacing the actuator pump motor, repairing damaged wiring or connectors, or replacing the ABS actuator assembly if necessary.
6. How can I diagnose the C1427 code on my 2014 Toyota RAV4?
Use an OBDII scanner to confirm the code, then inspect the brake actuator pump motor and related wiring for damage or poor connections.
7. Is the C1427 code a common issue for the 2014 Toyota RAV4?
While not exceedingly common, it can occur due to wear and tear or electrical problems in the ABS system.
8. How much does it cost to repair the C1427 code on a 2014 Toyota RAV4?
Repair costs vary but may range from $500 to $2,000, depending on whether the actuator pump motor or the entire ABS actuator assembly needs replacement.
9. Can a blown fuse cause the C1427 code in a 2014 Toyota RAV4?
Yes, a blown fuse in the ABS system could potentially cause the code, though it is less common than motor or wiring issues.
10. Do I need to reprogram anything after fixing the C1427 code on a 2014 Toyota RAV4?
In some cases, after replacing the ABS actuator assembly, the system may require recalibration or programming with a scan tool.
Discuss the causes and fixes for C1427 2014 Toyota RAV4 OBDII Code
Code C1427 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
