C1426 2013 Toyota RAV4 Code - Stop Light Switch Off Stuck Malfunction
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) receives stop light switch signals and uses them to determine whether or not the brakes are applied. Common causes include Blown Stop Light Switch Fuse, Faulty Stop Light Switch, Stop Light Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1426 2013 Toyota RAV4 indicates Stop Light Switch Off Stuck Malfunction.
- Common causes
- Common causes include Blown Stop Light Switch Fuse, Faulty Stop Light Switch, Stop Light Switch harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1426 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC C1426 2013 Toyota RAV4?
- Blown Stop Light Switch Fuse
- Faulty Stop Light Switch
- Stop Light Switch harness is open or shorted
- Stop Light Switch circuit poor electrical connection
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1426 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1426 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1426 2013 Toyota RAV4 code?
Need more information on how to fix the C1426 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1426 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1426 2013 Toyota RAV4 Code
1. What are common symptoms of the C1426 OBDII code in a 2013 Toyota RAV4?
The common symptoms include the brake lights staying on constantly, difficulty shifting out of park, and the inability to engage cruise control.
2. What does the C1426 OBDII code indicate in a 2013 Toyota RAV4?
The C1426 code indicates a malfunction with the stop light switch being stuck in the off position, affecting brake light operation and potentially other vehicle systems.
3. What are possible causes of the C1426 OBDII code in a 2013 Toyota RAV4?
Possible causes of the C1426 code include a faulty stop light switch, wiring issues, a misadjusted stop light switch, or a malfunction in the brake light circuit.
4. How can I diagnose the C1426 OBDII code in my 2013 Toyota RAV4?
Diagnosing the C1426 code involves checking the stop light switch for proper operation, inspecting the wiring for damage, and testing the brake light circuit for continuity and voltage.
5. Can I continue driving my 2013 Toyota RAV4 with the C1426 OBDII code?
It is not recommended to drive your vehicle with the C1426 code present, as it can affect the proper operation of the brake lights and potentially compromise safety.
6. How can I repair the C1426 OBDII code in my 2013 Toyota RAV4?
Repairing the C1426 code typically involves replacing the faulty stop light switch, adjusting the switch if necessary, repairing any damaged wiring, and clearing the code with a diagnostic tool.
7. Can I reset the C1426 OBDII code in my 2013 Toyota RAV4 without fixing the issue?
While you can clear the code temporarily, it will likely reappear if the underlying issue with the stop light switch is not addressed.
8. Are there any safety implications associated with the C1426 OBDII code in a 2013 Toyota RAV4?
Yes, there are safety implications as the malfunctioning stop light switch can lead to the brake lights not functioning properly, potentially causing accidents due to lack of proper signaling to other drivers.
9. How long does it typically take to repair the C1426 OBDII code in a 2013 Toyota RAV4?
The repair time for the C1426 code can vary depending on the exact cause of the issue, but it usually takes anywhere from 30 minutes to an hour to replace the stop light switch and make necessary adjustments.
10. Can I prevent the C1426 OBDII code from appearing in my 2013 Toyota RAV4?
Regular maintenance checks, including inspecting the stop light switch and wiring, can help prevent the C1426 code from appearing.
Discuss the causes and fixes for C1426 2013 Toyota RAV4 OBDII Code
Code C1426 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
