AutoCodes – Toyota – C1425 2014 Toyota RAV4

C1425 2014 Toyota RAV4 Code - Open In Stop Light Switch Circuit

Quick Answer

The Skid Control ECU (Actuator Assembly) detects the brake operating conditions through a signal transmitted by the stop light switch. Common causes include Stop Lamp Fuse, Faulty Stop Light Switch, Stop Light Switch harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1425 2014 Toyota RAV4 indicates Open In Stop Light Switch Circuit.
Common causes: Common causes include Stop Lamp Fuse, Faulty Stop Light Switch, Stop Light Switch harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 335

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 29, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1425 2014 Toyota RAV4 Description

The Skid Control ECU (Actuator Assembly) detects the brake operating conditions through a signal transmitted by the stop light switch. The Skid Control ECU (Actuator Assembly) incorporates a circuit to detect an open circuit. This Diagnostic Trouble Code (DTC) is output when an open circuit is detected in the stop light signal input line.

OBDII Code C1425 2014 Toyota RAV4 - Open In Stop Light Switch Circuit - AutoCodes.com — C1425 2014 Toyota RAV4 Code - Open In Stop Light Switch Circuit

What does this mean?

What are the Possible Causes of the DTC C1425 2014 Toyota RAV4?

Stop Lamp Fuse
Faulty Stop Light Switch
Stop Light Switch harness is open or shorted
Stop Light Switch circuit poor electrical connection
Faulty Skid Control ECU (Actuator Assembly)

How to Fix the DTC C1425 2014 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1425 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1425 2014 Toyota RAV4 code?

Need more information on how to fix the C1425 2014 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1425 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1425 2014 Toyota RAV4 Code

1. What are the common symptoms of OBDII code C1425 in a 2014 Toyota RAV4?

- The common symptoms include the illumination of the ABS warning light on the dashboard and potential issues with the vehicle's brake system.

2. What does the OBDII code C1425 "Open In Stop Light Switch Circuit" mean for a 2014 Toyota RAV4?

- This code indicates a problem with the circuit related to the stop light switch, which is a crucial component for the brake system.

3. What are the possible causes of OBDII code C1425 in a 2014 Toyota RAV4?

- The possible causes may include a faulty stop light switch, damaged wiring in the circuit, or a malfunctioning ABS module.

4. How can I diagnose the issue causing OBDII code C1425 in my 2014 Toyota RAV4?

- You can start by checking the stop light switch for proper operation, inspecting the wiring for any signs of damage, and using a diagnostic scanner to gather more information.

5. Is it safe to continue driving my 2014 Toyota RAV4 with OBDII code C1425 present?

- It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the brake system that could affect safety.

6. Can I repair OBDII code C1425 in my 2014 Toyota RAV4 by myself?

- Depending on your level of automotive knowledge and experience, you may be able to repair this issue yourself by replacing the faulty stop light switch or repairing the circuit.

7. How much does it typically cost to fix OBDII code C1425 in a 2014 Toyota RAV4?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to a thousand dollars if professional help is needed.

8. Are there any temporary solutions to clear OBDII code C1425 in my 2014 Toyota RAV4?

- Clearing the code with a diagnostic scanner may temporarily turn off the warning light, but it is crucial to address the underlying issue promptly to ensure safe operation of the vehicle.

9. Can OBDII code C1425 in a 2014 Toyota RAV4 cause other problems if left unfixed?

- Yes, leaving this issue unresolved can potentially lead to brake system malfunctions and compromise the overall safety of the vehicle.

10. How long does it typically take to repair OBDII code C1425 in a 2014 Toyota RAV4?

- The repair time can vary based on the specific cause of the issue and the expertise of the technician, but it may take a few hours to a day to complete the repairs.