C1424 2014 Toyota RAV4 Code - Master Cylinder Pressure Sensor Output Malfunction
Quick Answer
The Master Cylinder Pressure Sensor is connected to the Skid Control ECU (Brake Actuator Assembly). Common causes include Faulty Brake Actuator Assembly (Master Cylinder Pressure Sensor), Brake Actuator Assembly harness is open or shorted, Brake Actuator Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1424 2014 Toyota RAV4 indicates Master Cylinder Pressure Sensor Output Malfunction.
- Common causes
- Common causes include Faulty Brake Actuator Assembly (Master Cylinder Pressure Sensor), Brake Actuator Assembly harness is open or shorted, Brake Actuator Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1424 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC C1424 2014 Toyota RAV4?
- Faulty Brake Actuator Assembly (Master Cylinder Pressure Sensor)
- Brake Actuator Assembly harness is open or shorted
- Brake Actuator Assembly circuit poor electrical connection
How to Fix the DTC C1424 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1424 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1424 2014 Toyota RAV4 code?
Need more information on how to fix the C1424 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1424 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1424 2014 Toyota RAV4 Code
1. What does the OBDII code C1424 mean on a 2014 Toyota RAV4?
The code C1424 indicates a "Master Cylinder Pressure Sensor Output Malfunction," meaning the pressure sensor in the brake system is not working as expected.
2. What are the common symptoms of code C1424 in a 2014 Toyota RAV4?
Common symptoms include an illuminated ABS or brake warning light, reduced braking performance, and possible activation of fail-safe mode for the braking system.
3. What causes the C1424 code in a 2014 Toyota RAV4?
Possible causes include a faulty master cylinder pressure sensor, damaged wiring or connectors to the sensor, or issues with the ABS control module.
4. Can I drive my 2014 Toyota RAV4 with the C1424 code?
It’s not recommended to drive the vehicle with this code active, as it may impair braking performance and compromise safety.
5. How do I diagnose the C1424 code on a 2014 Toyota RAV4?
Use a diagnostic scan tool to confirm the code, inspect the master cylinder pressure sensor and wiring, and perform a continuity test to check for electrical issues.
6. How do I fix the C1424 code on a 2014 Toyota RAV4?
Repairs may involve replacing the master cylinder pressure sensor, repairing or replacing damaged wiring or connectors, or reprogramming/repairing the ABS control module.
7. How much does it cost to fix the C1424 code on a 2014 Toyota RAV4?
Repair costs vary but typically range from $100 to $300 for parts and labor, depending on whether the sensor or wiring needs replacement.
8. Does the C1424 code require ABS module reprogramming after repairs?
In some cases, ABS module reprogramming or calibration may be necessary after replacing the pressure sensor or repairing the system.
9. Can low brake fluid cause the C1424 code on a 2014 Toyota RAV4?
Low brake fluid is unlikely to directly cause this code, but it can contribute to brake system issues. Check and correct fluid levels during diagnosis.
10. How can I prevent the C1424 code from recurring on my 2014 Toyota RAV4?
Regular maintenance, including inspecting the brake system and ensuring wiring and connectors are in good condition, can help prevent this issue.
Discuss the causes and fixes for C1424 2014 Toyota RAV4 OBDII Code
Code C1424 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
