C1422 2017 Toyota RAV4 Code - Master Cylinder Pressure Sensor Zero Point High Malfunction
Quick Answer
The Master Cylinder Pressure Sensor is connected to the Skid Control ECU (Brake Actuator Assembly) in the Brake Actuator Assembly. Common causes include Faulty Stop Light Switch Assembly, Stop Light Switch Assembly harness is open or shorted, Stop Light Switch Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1422 2017 Toyota RAV4 indicates Master Cylinder Pressure Sensor Zero Point High Malfunction.
- Common causes
- Common causes include Faulty Stop Light Switch Assembly, Stop Light Switch Assembly harness is open or shorted, Stop Light Switch Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1422 2017 Toyota RAV4 Description
What are the Possible Causes of the DTC C1422 2017 Toyota RAV4?
- Faulty Stop Light Switch Assembly
- Stop Light Switch Assembly harness is open or shorted
- Stop Light Switch Assembly circuit poor electrical connection
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1422 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1422 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1422 2017 Toyota RAV4 code?
Need more information on how to fix the C1422 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1422 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1422 2017 Toyota RAV4 Code
1. What does the OBDII code C1422 mean for a 2017 Toyota RAV4?
C1422 indicates a "Master Cylinder Pressure Sensor Zero Point High Malfunction," meaning the sensor's baseline reading is outside its expected range.
2. What are common symptoms of the C1422 code?
Symptoms may include the ABS warning light, traction control light, or vehicle stability control light turning on, and reduced braking performance.
3. What causes the C1422 code in a 2017 Toyota RAV4?
Common causes include a faulty master cylinder pressure sensor, incorrect zero-point calibration, wiring issues, or problems with the ABS control module.
4. Can I drive my 2017 Toyota RAV4 with the C1422 code?
While the vehicle may still be drivable, compromised braking or stability control could pose a safety risk. It's best to address the issue promptly.
5. How do you fix the C1422 code on a Toyota RAV4?
Repairs may involve recalibrating the master cylinder pressure sensor, checking for damaged wiring, or replacing the sensor or ABS control module if necessary.
6. How is the zero-point calibration performed for the master cylinder pressure sensor?
Zero-point calibration typically requires a scan tool to reset the sensor to factory settings while ensuring the brake pedal is not pressed during the process.
7. Can a weak battery cause the C1422 code?
Yes, a weak or failing battery can sometimes disrupt sensor calibration or cause intermittent electrical issues leading to this code.
8. Does the C1422 code affect other systems in the vehicle?
It may impact the ABS, traction control, and stability control systems, as they rely on accurate pressure sensor readings for proper operation.
9. How much does it cost to repair the C1422 code?
Repair costs can vary depending on the issue, ranging from $50 for recalibration to $300-$600 for sensor or module replacement.
10. How can you prevent the C1422 code from occurring?
Regular maintenance, keeping electrical connections clean, and performing system calibrations after brake system repairs can help prevent this code.
Discuss the causes and fixes for C1422 2017 Toyota RAV4 OBDII Code
Code C1422 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
