C1413 2018 Toyota RAV4 Code - Front Speed Sensor Right Output Malfunction
Quick Answer
The speed sensor detects the wheel speed and sends the appropriate signals to the Skid Control ECU (Brake Actuator Assembly). Common causes include Faulty Front Speed Sensor Right, Front Speed Sensor Right Rotor (Front Axle Hub Sub-Assembly Right), Front Speed Sensor Right harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1413 2018 Toyota RAV4 indicates Front Speed Sensor Right Output Malfunction.
- Common causes
- Common causes include Faulty Front Speed Sensor Right, Front Speed Sensor Right Rotor (Front Axle Hub Sub-Assembly Right), Front Speed Sensor Right harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1413 2018 Toyota RAV4 Description
What are the Possible Causes of the DTC C1413 2018 Toyota RAV4?
- Faulty Front Speed Sensor Right
- Front Speed Sensor Right Rotor (Front Axle Hub Sub-Assembly Right)
- Front Speed Sensor Right harness is open or shorted
- Front Speed Sensor Right circuit poor electrical connection
How to Fix the DTC C1413 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
If there is iron powder sticking to the rotor, this will result in a malfunction, so confirm that the rotor is not contaminated with foreign material before replacing the sensor.
Check the speed sensor signal after cleaning or replacement.
On most vehicles, the Front Speed Sensor Rotor is incorporated into the Front Axle Hub Sub-Assembly. If the Speed Sensor Rotor needs to be replaced, replace it together with the Front Axle Hub Sub-Assembly.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1413 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1413 2018 Toyota RAV4 code?
Need more information on how to fix the C1413 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1413 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1413 2018 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C1413 in a 2018 Toyota RAV4?
- The common symptoms include ABS warning light on the dashboard, traction control system malfunction, and potential loss of stability control.
2. What does the OBDII code C1413 indicating "Front Speed Sensor Right Output Malfunction" mean for a 2018 Toyota RAV4?
- This code indicates a malfunction in the front right wheel speed sensor, affecting the vehicle's ABS and traction control systems.
3. What are the possible causes of OBDII code C1413 in a 2018 Toyota RAV4?
- The possible causes include a faulty front right wheel speed sensor, damaged sensor wiring or connectors, sensor alignment issues, or a malfunction in the ABS control module.
4. How can I diagnose the Front Speed Sensor Right Output Malfunction in my 2018 Toyota RAV4?
- Diagnosing this issue typically involves inspecting the front right wheel speed sensor, checking its wiring and connections for damage, and using a diagnostic tool to read and clear the error code.
5. Can I drive my 2018 Toyota RAV4 with OBDII code C1413 triggered?
- It is not recommended to drive the vehicle with this code triggered, as it can affect the ABS and traction control systems, compromising safety and stability while driving.
6. How can I repair OBDII code C1413 in my 2018 Toyota RAV4?
- Repairing this code usually involves replacing the front right wheel speed sensor if it's faulty, repairing or replacing damaged wiring or connectors, and resetting the error code using a diagnostic tool.
7. Are there any DIY tips for fixing OBDII code C1413 in a 2018 Toyota RAV4?
- While some basic checks like inspecting the sensor and its connections can be done DIY, it is recommended to consult a professional mechanic for accurate diagnosis and proper repair to ensure safety.
8. How much does it cost to repair OBDII code C1413 in a 2018 Toyota RAV4?
- The cost of repairing this code can vary depending on the exact cause of the issue, but it typically includes the cost of a new wheel speed sensor, labor for installation, and diagnostic fees.
9. Will OBDII code C1413 reset itself after repair in a 2018 Toyota RAV4?
- After repairing the issue causing the code, you may need to use a diagnostic tool to clear the error code and reset the system to turn off the ABS warning light on the dashboard.
10. Is OBDII code C1413 a common issue in 2018 Toyota RAV4 vehicles?
- While not extremely common, issues with wheel speed sensors leading to code C1413 can occur in 2018 Toyota RAV4 vehicles due to sensor wear, damage, or electrical faults.
Discuss the causes and fixes for C1413 2018 Toyota RAV4 OBDII Code
Code C1413 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
