C1408 Chrysler Code - Transfer Case Brake Control Circuit High
Quick Answer
The Front Control Module monitors the Shift Motor Sensor Assembly. Common causes include Faulty Shift Motor Sensor Assembly, Shift Motor Sensor Assembly harness is open or shorted, Shift Motor Sensor Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1408 Chrysler indicates Transfer Case Brake Control Circuit High.
- Common causes
- Common causes include Faulty Shift Motor Sensor Assembly, Shift Motor Sensor Assembly harness is open or shorted, Shift Motor Sensor Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1408 Chrysler Description
What are the Possible Causes of the DTC C1408 Chrysler?
- Faulty Shift Motor Sensor Assembly
- Shift Motor Sensor Assembly harness is open or shorted
- Shift Motor Sensor Assembly circuit poor electrical connection
- Faulty Front Control Module
How to Fix the DTC C1408 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1408 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1408 Chrysler code?
Need more information on how to fix the C1408 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1408 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1408 Chrysler Code
1. What does OBDII code C1408 mean for a Chrysler vehicle?
C1408 indicates a high voltage issue in the transfer case brake control circuit, suggesting an electrical problem in the transfer case system.
2. What are the common symptoms of code C1408 on a Chrysler?
Symptoms may include the transfer case not engaging properly, 4WD system malfunction, warning lights on the dashboard, or unusual noises from the drivetrain.
3. What causes the C1408 code to appear on a Chrysler?
Common causes include damaged wiring or connectors in the transfer case circuit, a malfunctioning transfer case brake solenoid, or a failed control module.
4. Can a faulty transfer case brake solenoid trigger the C1408 code?
Yes, if the solenoid is faulty or shorted, it can cause a high voltage condition and trigger the C1408 code.
5. How can I diagnose the C1408 code on my Chrysler?
Inspect the wiring and connectors for damage or corrosion, test the transfer case brake solenoid for proper operation, and use a multimeter to check circuit voltage.
6. Is it safe to drive with the C1408 code on a Chrysler?
Driving may be possible, but the 4WD system could malfunction, potentially leading to unsafe driving conditions in off-road or slippery environments.
7. How do I fix the C1408 code on a Chrysler?
Repairs may involve replacing damaged wiring, repairing connectors, replacing the transfer case brake solenoid, or reprogramming the control module if needed.
8. Can a blown fuse cause the C1408 code on a Chrysler?
While uncommon, a blown fuse in the transfer case circuit could contribute to the issue and should be checked during diagnosis.
9. Does the C1408 code require reprogramming the control module?
Reprogramming is not always required, but if the control module is faulty or has corrupted software, reprogramming or replacement may be necessary.
10. How much does it cost to repair the C1408 code on a Chrysler?
Repair costs can range from $100 to $500, depending on whether wiring repairs, solenoid replacement, or module reprogramming is required.
Discuss the causes and fixes for C1408 Chrysler OBDII Code
Code C1408 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
