C1404 Jeep Code - Transfer Case Range Position Sensor Circuit Low
Quick Answer
The Final Drive Control Module monitors the Transfer Case Range Position Sensor. Common causes include Faulty Transfer Case Range Position Sensor, Transfer Case Range Position Sensor harness is open or shorted, Transfer Case Range Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1404 Jeep indicates Transfer Case Range Position Sensor Circuit Low.
- Common causes
- Common causes include Faulty Transfer Case Range Position Sensor, Transfer Case Range Position Sensor harness is open or shorted, Transfer Case Range Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1404 Jeep Description
What are the Possible Causes of the DTC C1404 Jeep?
- Faulty Transfer Case Range Position Sensor
- Transfer Case Range Position Sensor harness is open or shorted
- Transfer Case Range Position Sensor circuit poor electrical connection
- Faulty Final Drive Control Module
How to Fix the DTC C1404 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1404 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1404 Jeep code?
Need more information on how to fix the C1404 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1404 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1404 Jeep Code
1. What are the common symptoms of OBDII code C1404 Jeep related to the Transfer Case Range Position Sensor Circuit Low?
- Common symptoms include difficulty shifting gears, erratic shifting behavior, and the illumination of the check engine light.
2. What can cause the OBDII code C1404 Jeep to trigger the Transfer Case Range Position Sensor Circuit Low?
- The code can be triggered by a faulty transfer case range position sensor, damaged wiring or connectors, or a problem with the transfer case control module.
3. How can I diagnose the cause of OBDII code C1404 Jeep for the Transfer Case Range Position Sensor Circuit Low?
- Diagnosis involves checking the transfer case range position sensor, inspecting the wiring and connectors for damage, and performing tests on the transfer case control module.
4. Can driving with OBDII code C1404 Jeep for the Transfer Case Range Position Sensor Circuit Low cause further damage to my vehicle?
- Continuing to drive with this code may lead to issues with the transfer case operation and potentially cause damage to other components, so it is recommended to address the problem promptly.
5. What are some repair tips for fixing OBDII code C1404 Jeep related to the Transfer Case Range Position Sensor Circuit Low?
- Repair tips include replacing the transfer case range position sensor, repairing any damaged wiring or connectors, and reprogramming the transfer case control module if necessary.
6. Is it safe to continue driving my Jeep with the Transfer Case Range Position Sensor Circuit Low code?
- It is not recommended to continue driving your vehicle with this code as it can lead to further transmission issues and potentially affect the drivability of your Jeep.
7. How much does it typically cost to repair OBDII code C1404 in a Jeep for the Transfer Case Range Position Sensor Circuit Low?
- The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $200 to $500, including parts and labor.
8. Can I reset the OBDII code C1404 Jeep for the Transfer Case Range Position Sensor Circuit Low without fixing the underlying issue?
- While you can clear the code temporarily, it will likely return until the root cause of the problem is addressed by repairing or replacing the faulty components.
9. How long does it take to repair OBDII code C1404 in a Jeep for the Transfer Case Range Position Sensor Circuit Low?
- The repair time can vary based on the exact cause of the issue and the complexity of the repair, but it typically takes a few hours to complete the repair process.
10. Are there any DIY solutions for fixing OBDII code C1404 Jeep related to the Transfer Case Range Position Sensor Circuit Low?
- While some basic troubleshooting steps can be attempted by DIY enthusiasts, it is recommended to have a professional diagnose and repair the issue to ensure proper functioning of the transfer case system.
Discuss the causes and fixes for C1404 Jeep OBDII Code
Code C1404 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
