AutoCodes – Toyota – C1368 Toyota

C1368 Toyota Code - Linear Solenoid Valve Offset Malfunction

Quick Answer

The skid control ECU stores and corrects the difference in each individual part such as the stroke sensor, actuator soelnoid, and stroke simulator solenoid. Common causes include Initialization of linear solenoid and calibration undone, Faulty Skid Control ECU, Skid Control ECU harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1368 Toyota indicates Linear Solenoid Valve Offset Malfunction.
Common causes: Common causes include Initialization of linear solenoid and calibration undone, Faulty Skid Control ECU, Skid Control ECU harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 23,092

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 20, 2020

Description
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1368 Toyota Description

The skid control ECU stores and corrects the difference in each individual part such as the stroke sensor, actuator soelnoid, and stroke simulator solenoid. Perform initialization of linear solenoid valve and calibration if these parts are replaced.
The skid control ECU receives shift position P signal from the HV control ECU through CAN communication system.
The DTCs are cancelled when result of linear valve offset learning is normal.

OBDII Code C1368 Toyota - Linear Solenoid Valve Offset Malfunction - AutoCodes.com — C1368 Toyota Code - Linear Solenoid Valve Offset Malfunction

What does this mean?

What are the Possible Causes of the DTC C1368 Toyota?

Initialization of linear solenoid and calibration undone
Faulty Skid Control ECU
Skid Control ECU harness is open or shorted
Skid Control ECU circuit poor electrical connection

How to Fix the DTC C1368 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Linear Solenoid Valve Offset should be initialized (calibrate to zero). If problem persistss, Skid Control ECU may need to be replace.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1368 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1368 Toyota code?

Need more information on how to fix the C1368 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1368 Toyota code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.