C1360 Code - Malfunction In Master Cylinder Pressure Sensor
Quick Answer
The Master Cylinder Pressure Sensors are connected to the Skid control ECU. Common causes include Faulty Master Cylinder Pressure Sensor, Master Cylinder Pressure Sensor harness is open or shorted, Master Cylinder Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1360 indicates Malfunction In Master Cylinder Pressure Sensor.
- Common causes
- Common causes include Faulty Master Cylinder Pressure Sensor, Master Cylinder Pressure Sensor harness is open or shorted, Master Cylinder Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1360 Description
What are the Possible Causes of the DTC C1360?
- Faulty Master Cylinder Pressure Sensor
- Master Cylinder Pressure Sensor harness is open or shorted
- Master Cylinder Pressure Sensor circuit poor electrical connection
How to Fix the DTC C1360?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1360 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1360 code?
Need more information on how to fix the C1360 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1360 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C1360 Lexus — Malfunction In Master Cylinder Pressure Sensor
- C1360 Scion — Malfunction In Master Cylinder Pressure Sensor
- C1360 Toyota — Malfunction In Master Cylinder Pressure Sensor
Frequently Asked Questions about C1360 Code
1. What are common symptoms of OBDII code C1360 (Malfunction In Master Cylinder Pressure Sensor)?
- Common symptoms include the ABS warning light illuminating on the dashboard, poor braking performance, and potential loss of brake assist functionality.
2. What can cause OBDII code C1360 to trigger?
- This code is typically triggered by a malfunction in the master cylinder pressure sensor, which may be caused by wiring issues, sensor damage, or hydraulic system problems.
3. How can I diagnose the cause of OBDII code C1360?
- Diagnosing this code involves inspecting the wiring harness and connectors of the master cylinder pressure sensor, checking the sensor for damage, and testing the hydraulic system for leaks or other issues.
4. Can I still drive my vehicle with OBDII code C1360 present?
- It is not recommended to drive your vehicle with this code active, as it may affect the proper functioning of the brake system, leading to safety risks.
5. Is it possible to reset OBDII code C1360 without fixing the underlying issue?
- Resetting the code without addressing the root cause will only temporarily clear the warning light, and the issue is likely to reappear once the system detects the fault again.
6. What are some repair tips for fixing OBDII code C1360?
- Repair tips may include checking and repairing any damaged wiring, replacing the faulty master cylinder pressure sensor, and ensuring proper functioning of the hydraulic brake system.
7. Can a DIY enthusiast fix OBDII code C1360 at home?
- While some basic diagnostic steps can be done at home, fixing this code may require specialized tools and knowledge, so it is recommended to consult a professional mechanic for proper repair.
8. How much does it cost to repair OBDII code C1360?
- The cost of repairing this OBDII code can vary depending on the extent of the damage and the specific components that need to be replaced. It is best to get a diagnostic assessment from a mechanic for an accurate estimate.
9. Will OBDII code C1360 cause my vehicle to fail an emissions test?
- This code is related to the brake system and is unlikely to cause your vehicle to fail an emissions test. However, it is still crucial to address the issue promptly for safe driving.
10. Is it safe to ignore OBDII code C1360 and continue driving?
- Ignoring this code can compromise the safety and performance of your vehicle's brake system, so it is strongly advised to have the issue diagnosed and repaired as soon as possible.
Discuss the causes and fixes for C1360 OBDII Code
Code C1360 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
