C1346 Hyundai Code - Rear Low Frequency Initiator Channel Failure
Quick Answer
The Tire Pressure Monitoring System (TPMS) monitors the pressure of the tire and when it drops below a certain pressure, the TPMS ECU makes the warning lamp turn on for notifying the driver. Common causes include Faulty Rear Low Frequency Initiator, Rear Low Frequency Initiator harness is open or shorted, Rear Low Frequency Initiator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1346 Hyundai indicates Rear Low Frequency Initiator Channel Failure.
- Common causes
- Common causes include Faulty Rear Low Frequency Initiator, Rear Low Frequency Initiator harness is open or shorted, Rear Low Frequency Initiator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1346 Hyundai Description
What are the Possible Causes of the DTC C1346 Hyundai?
- Faulty Rear Low Frequency Initiator
- Rear Low Frequency Initiator harness is open or shorted
- Rear Low Frequency Initiator circuit poor electrical connection
How to Fix the DTC C1346 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1346 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1346 Hyundai code?
Need more information on how to fix the C1346 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1346 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1346 Hyundai Code
1. What are the common symptoms of OBDII code C1346 Hyundai (Rear Low Frequency Initiator Channel Failure)?
- Common symptoms include the traction control light illuminating on the dashboard and possible issues with the vehicle's stability control system.
2. What can cause the OBDII code C1346 Hyundai to trigger?
- The code C1346 typically triggers due to a fault in the rear low frequency initiator channel, which is a component of the vehicle's stability control system.
3. How serious is the OBDII code C1346 Hyundai (Rear Low Frequency Initiator Channel Failure)?
- While the vehicle may still be drivable with this code, it is important to address the issue promptly to ensure the proper functioning of the stability control system.
4. Can I continue driving my Hyundai with the OBDII code C1346 present?
- It is generally not recommended to ignore the C1346 code, as it may affect the vehicle's stability control system and potentially compromise safety.
5. How can the OBDII code C1346 Hyundai be repaired?
- Repairing the C1346 code typically involves diagnosing the specific cause of the rear low frequency initiator channel failure and then addressing the underlying issue, which may involve replacing faulty components.
6. Is it possible to reset the OBDII code C1346 Hyundai without fixing the issue?
- While clearing the code may temporarily turn off the warning light, the underlying problem causing the C1346 code will persist until properly addressed.
7. Can weather conditions or road conditions trigger the OBDII code C1346 Hyundai?
- Extreme weather conditions or rough road conditions could potentially contribute to triggering the C1346 code if they lead to damage or malfunction of the rear low frequency initiator channel.
8. Are there any DIY tips for troubleshooting the OBDII code C1346 Hyundai?
- DIY troubleshooting for the C1346 code may include checking the connections to the rear low frequency initiator channel and inspecting for any visible damage or corrosion.
9. How much does it typically cost to repair the OBDII code C1346 Hyundai?
- The cost of repairing the C1346 code can vary depending on the specific cause of the issue, but it may involve part replacement and labor costs, which could range from a few hundred to over a thousand dollars.
10. Can a regular mechanic repair the OBDII code C1346 Hyundai, or should I visit a dealership?
- While a regular mechanic with experience in diagnosing and repairing stability control system issues may be able to address the C1346 code, visiting a dealership or specialized Hyundai service center is recommended for precise diagnosis and repair.
Discuss the causes and fixes for C1346 Hyundai OBDII Code
Code C1346 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
