C1345 LEXUS - Linear Solenoid Valve Offset Learning Undone
C1345 LEXUS Possible Causes
- Initialization of linear solenoid and calibration undone
- Faulty Skid Control ECU
- Skid Control ECU harness is open or shorted
- Skid Control ECU circuit poor electrical connection
First diagnose C1345 LEXUS code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
C1345 LEXUS Tech NotesLinear Solenoid Valve Offset should be initialized (calibrate to zero). If problem persistss, Skid Control ECU may need to be replace.
Cost of diagnosing the C1345 LEXUS code
Labor: 1.0The cost of diagnosing the C1345 LEXUS code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
C1345 LEXUS Possible Symptoms
- Anti-Lock Brake System (ABS) Warning Light ON
- Engine Light ON (or Service Engine Soon Warning Light)
C1345 Lexus DescriptionThe skid control ECU stores and corrects the difference in each individual part such as the stroke sensor, actuator soelnoid, and stroke simulator solenoid. Perform initialization of linear solenoid valve and calibration if these parts are replaced.
The skid control ECU receives shift position P signal from the HV control ECU through CAN communication system.
The DTCs are cancelled when result of linear valve offset learning is normal.
C1345 LEXUS More InformationNeed more information on how to fix the C1345 LEXUS code?
Get Access to Factory Service Manuals
Need more help?Get the C1345 Lexus code diagnosed by a professional: Find a repair shop in your area
C1345 LEXUS CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C1345 Lexus code? Have you replaced any parts?
Any information is appreciated. Thanks