C1336 2017 Toyota RAV4 Code - Zero Point Calibration of Acceleration Sensor Undone
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) receives signals from the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) via the Controller Area Network (CAN) communication system. Common causes include Acceleration Sensor Calibration, Sensor installation, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1336 2017 Toyota RAV4 indicates Zero Point Calibration of Acceleration Sensor Undone.
- Common causes
- Common causes include Acceleration Sensor Calibration, Sensor installation, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1336 2017 Toyota RAV4 Description
The Airbag Sensor Assembly has a built-in Yaw Rate Sensor and Acceleration Sensor and detects the vehicle's condition. If there is trouble in the bus lines between the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) and the CAN communication system, the DTC U0124 (Lost Communication with Lateral Acceleration Sensor Module) is output.
The Diagnostic Trouble Code (DTC) is also output when the calibration has not been completed.
What are the Possible Causes of the DTC C1336 2017 Toyota RAV4?
- Acceleration Sensor Calibration
- Sensor installation
- Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly)
- Airbag Sensor Assembly harness is open or shorted
- Airbag Sensor Assembly circuit poor electrical connection
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1336 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1336 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1336 2017 Toyota RAV4 code?
Need more information on how to fix the C1336 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1336 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1336 2017 Toyota RAV4 Code
1. What does the OBDII code C1336 in a 2017 Toyota RAV4 indicate?
The code C1336 indicates that the Zero Point Calibration of the Acceleration Sensor is undone.
2. What are the common symptoms of OBDII code C1336 in a 2017 Toyota RAV4?
Common symptoms include the check engine light being illuminated on the dashboard and potential issues with the vehicle's stability control system.
3. What can cause the Zero Point Calibration of the Acceleration Sensor to be undone in a 2017 Toyota RAV4?
The calibration can be undone due to a variety of reasons, such as a dead battery, electrical issues, or sensor malfunctions.
4. How can I repair OBDII code C1336 in my 2017 Toyota RAV4?
To repair the code C1336, you will need to perform a Zero Point Calibration of the Acceleration Sensor using a compatible diagnostic tool or by visiting a professional mechanic.
5. Can I continue driving my 2017 Toyota RAV4 with the C1336 code?
It is generally not recommended to continue driving with the code C1336 illuminated, as it may affect the vehicle's stability control system and overall safety.
6. How much does it cost to fix OBDII code C1336 in a 2017 Toyota RAV4?
The cost of fixing the C1336 code can vary depending on the exact cause of the issue, but it may involve a diagnostic fee and potentially replacing sensors or addressing electrical issues.
7. Is it possible to reset the Zero Point Calibration of the Acceleration Sensor without professional help?
While some basic diagnostic tools may allow you to reset the calibration, it is recommended to have it done by a professional to ensure accuracy and proper functioning.
8. How often does the Zero Point Calibration of the Acceleration Sensor need to be performed?
The calibration may need to be performed after certain maintenance procedures or if the system detects issues with the sensor's readings.
9. Can extreme weather conditions affect the Zero Point Calibration of the Acceleration Sensor?
Extreme weather conditions, particularly temperature fluctuations, can potentially impact the sensor's calibration and may contribute to the C1336 code being triggered.
10. Will resetting the C1336 code make it go away permanently?
Resetting the code may clear it temporarily, but if the underlying issue causing the calibration problem persists, the code is likely to reappear. It's important to diagnose and address the root cause.
Discuss the causes and fixes for C1336 2017 Toyota RAV4 OBDII Code
Code C1336 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
