C1333 Hyundai Code - Sensor 2 Fault
Quick Answer
The TPMS Receiver Module monitors the TPMS sensor. Common causes include Damage TPMS sensor 2, Faulty TPMS sensor 2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1333 Hyundai indicates Sensor 2 Fault.
- Common causes
- Common causes include Damage TPMS sensor 2, Faulty TPMS sensor 2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1333 Hyundai Description
What are the Possible Causes of the DTC C1333 Hyundai?
- Damage TPMS sensor 2
- Faulty TPMS sensor 2
How to Fix the DTC C1333 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1333 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1333 Hyundai code?
Need more information on how to fix the C1333 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1333 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1333 Hyundai Code
1. What does OBDII code C1333 mean on a Hyundai?
C1333 indicates a "Sensor 2 Fault" related to the vehicle's ABS (Anti-lock Braking System) or stability control system.
2. What are the common symptoms of code C1333 on a Hyundai?
Common symptoms include the ABS warning light or traction control light on the dashboard, reduced stability control functionality, or potential loss of ABS operation.
3. What causes the C1333 fault code in a Hyundai?
This code is typically caused by a faulty wheel speed sensor, damaged wiring or connectors, or an issue with the ABS module.
4. Which sensor is referred to as "Sensor 2" in code C1333?
"Sensor 2" usually refers to one of the rear wheel speed sensors, but the exact location can vary depending on the Hyundai model. Check the service manual for confirmation.
5. Can I drive my Hyundai with the C1333 fault code?
While the car may still be drivable, safety features like ABS and traction control may not work properly, so it’s recommended to address the issue promptly.
6. How do I diagnose the C1333 code on my Hyundai?
Inspect the wiring and connectors for damage, test the sensor's resistance with a multimeter, and use a scan tool to monitor wheel speed sensor data.
7. How can I fix the C1333 code on a Hyundai?
Repairs may include replacing the faulty wheel speed sensor, fixing damaged wiring, or recalibrating the ABS module if necessary.
8. How much does it cost to repair a C1333 code in a Hyundai?
The cost can range from $100 to $300 depending on whether the wheel speed sensor needs replacement or if additional repairs are required.
9. Can a dirty wheel speed sensor trigger the C1333 code?
Yes, debris or dirt on the sensor can interfere with its readings and potentially trigger the C1333 fault code.
10. Do I need to clear the C1333 code after repairs?
Yes, after repairs, use an OBDII scanner to clear the code and verify that the issue is resolved.
Discuss the causes and fixes for C1333 Hyundai OBDII Code
Code C1333 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
