AutoCodes – Generic – C1306

C1306 Code - Steering Wheel Angle Sensor Zero Position Not Found

Quick Answer

The steering wheel rotation (in degrees) is sent to the Anti-Lock Brake System (ABS) module. Common causes include Improper installation or positioning of the steering angle sensor, Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1306 indicates Steering Wheel Angle Sensor Zero Position Not Found.
Common causes: Common causes include Improper installation or positioning of the steering angle sensor, Faulty Steering Angle Sensor, Steering Angle Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,959

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 06, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1306 Description

The steering wheel rotation (in degrees) is sent to the Anti-Lock Brake System (ABS) module. Voltage is supplied to the steering wheel angle sensor from the ABS module and ground is provided by the ABS module. The steering wheel rotation sensor monitor the steering wheel position when the slotted wheel in the clockspring assembly rotates through the infrared light generated by the sensor.

OBDII Code C1306 - Steering Wheel Angle Sensor Zero Position Not Found - AutoCodes.com — C1306 Code - Steering Wheel Angle Sensor Zero Position Not Found

What does this mean?

What are the Possible Causes of the DTC C1306?

Improper installation or positioning of the steering angle sensor
Faulty Steering Angle Sensor
Steering Angle Sensor harness is open or shorted
Steering Angle Sensor circuit poor electrical connection

How to Fix the DTC C1306?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1306 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1306 code?

Need more information on how to fix the C1306 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1306 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

C1306 Hyundai — Right Front Internal Interference Failure
C1306 KIA — Right Front Internal Interference Failure
C1306 Mazda — Steering Wheel Angle Sensor Zero Position Not Found

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1306 Code

1. What are the common symptoms of OBDII code C1306 (Steering Wheel Angle Sensor Zero Position Not Found)?

- Common symptoms include the traction control or stability control light illuminating on the dashboard, steering wheel vibration, and potential loss of control while driving.

2. What can cause the OBDII code C1306 to trigger?

- The code C1306 is typically triggered by a malfunction in the steering wheel angle sensor, damaged wiring, or a problem with the sensor's calibration.

3. How serious is the issue related to OBDII code C1306?

- The issue related to code C1306 should be taken seriously as it can affect the vehicle's stability control system, potentially leading to unsafe driving conditions.

4. Can I continue driving my vehicle with the OBDII code C1306 present?

- It is not recommended to continue driving the vehicle with the code C1306 present, as it can compromise the vehicle's stability and safety systems.

5. What are some DIY repair tips for addressing code C1306?

- DIY repair tips may include checking and cleaning the connections to the steering wheel angle sensor, inspecting the wiring for any damage, and recalibrating the sensor if possible.

6. How much does it typically cost to repair OBDII code C1306 at a professional auto repair shop?

- The cost of repairing code C1306 can vary depending on the extent of the issue, but it may range from $200 to $500 at a professional auto repair shop.

7. Is it possible to reset the OBDII code C1306 without addressing the underlying issue?

- While it is possible to reset the code temporarily, it is crucial to address the underlying issue causing code C1306 to prevent further safety risks while driving.

8. Can a steering wheel angle sensor be replaced without professional help?

- Replacing a steering wheel angle sensor may require specialized tools and knowledge, so it is recommended to seek professional help for this repair.

9. Are there any recalls or technical service bulletins related to OBDII code C1306?

- It is advisable to check with the vehicle manufacturer or a certified dealership for any recalls or technical service bulletins related to code C1306 for specific make and model information.

10. How often does the steering wheel angle sensor need to be recalibrated to prevent OBDII code C1306 from recurring?

- Recalibration of the steering wheel angle sensor may be necessary after certain repairs or maintenance procedures, but it is best to follow the manufacturer's recommendations for calibration intervals.