C12B1 Cadillac Code - ABS Master Cylinder Pressure Sensor and Brake Pedal Position Sensor Not Plausible
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C12B1 Cadillac indicates ABS Master Cylinder Pressure Sensor and Brake Pedal Position Sensor Not Plausible.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C12B1 Cadillac Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C12B1 Cadillac?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C12B1 Cadillac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C12B1 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C12B1 Cadillac code?
Need more information on how to fix the C12B1 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C12B1 Cadillac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C12B1 Cadillac Code
What does the OBDII code C12B1 mean for my Cadillac?
The C12B1 code indicates that there is a problem with the ABS master cylinder pressure sensor and brake pedal position sensor, which are not providing plausible readings to the vehicle's computer.
What symptoms might I experience with code C12B1?
Common symptoms include warning lights on the dashboard (ABS and brake lights), an unresponsive or spongy brake pedal, and potential issues with the anti-lock braking system functionality.
What could cause the C12B1 code to trigger?
Possible causes include a faulty ABS master cylinder pressure sensor, a malfunctioning brake pedal position sensor, wiring issues or connectors that are damaged or corroded, or problems with the ABS control module.
How can I diagnose the issue associated with C12B1?
Begin by using an OBDII scanner to confirm the code. Inspect the wiring and connectors for damage, check the sensors for proper operation, and look for any additional codes that may provide further insight into the problem.
Can I drive my vehicle if the C12B1 code is present?
It is not recommended to drive the vehicle with this code, as it may compromise braking performance and vehicle safety. If you experience symptoms, seek repair immediately.
What are the most common repairs for code C12B1?
Repairs may include replacing the ABS master cylinder pressure sensor, replacing the brake pedal position sensor, repairing or replacing damaged wiring and connectors, or reprogramming the ABS control module.
How do I reset the C12B1 code after repairs?
After completing the necessary repairs, you can reset the code by using an OBDII scanner to clear the codes or by disconnecting the vehicle's battery for a short period and then reconnecting it.
Is it necessary to replace both sensors when I have code C12B1?
While it may not be necessary to replace both sensors, it is often recommended to replace both if they are both malfunctioning or if one has failed, as they work together to provide accurate data to the vehicle's computer.
What should I do if the C12B1 code returns after repairs?
If the code returns, recheck all connections and wiring for issues, verify the new sensors are functioning correctly, and consider seeking professional diagnostic assistance to identify any underlying issues.
Discuss the causes and fixes for C12B1 Cadillac OBDII Code
Code C12B1 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
