C12B1 2016 Chevrolet Silverado Code - ABS Master Cylinder Pressure Sensor and Brake Pedal Position Sensor Not Plausible
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C12B1 2016 Chevrolet Silverado indicates ABS Master Cylinder Pressure Sensor and Brake Pedal Position Sensor Not Plausible.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C12B1 2016 Chevrolet Silverado Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C12B1 2016 Chevrolet Silverado?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C12B1 2016 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C12B1 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C12B1 2016 Chevrolet Silverado code?
Need more information on how to fix the C12B1 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C12B1 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C12B1 2016 Chevrolet Silverado Code
1. What are the common symptoms of OBDII code C12B1 on a 2016 Chevrolet Silverado?
- Common symptoms include the ABS warning light illuminating on the dashboard, erratic brake behavior, and potential loss of brake functionality.
2. What does the OBDII code C12B1 indicate for a 2016 Chevrolet Silverado?
- The code C12B1 typically indicates a fault related to the ABS master cylinder pressure sensor and brake pedal position sensor not providing plausible data.
3. What are the possible causes of OBDII code C12B1 on a 2016 Chevrolet Silverado?
- Possible causes include sensor malfunctions, wiring issues, sensor calibration problems, or faults in the ABS system.
4. How can I diagnose the ABS master cylinder pressure sensor and brake pedal position sensor on a 2016 Chevrolet Silverado?
- Diagnosing these sensors may require a professional scan tool to read specific sensor data, checking sensor wiring for continuity, and verifying sensor calibration.
5. Can I continue driving my 2016 Chevrolet Silverado with the OBDII code C12B1 present?
- It is not recommended to continue driving with this code active, as it may compromise the ABS system's functionality and affect overall brake performance.
6. Are there any DIY repair tips for resolving OBDII code C12B1 on a 2016 Chevrolet Silverado?
- DIY repair may involve inspecting sensor connections, ensuring proper sensor alignment, and checking for any visible damage or corrosion that could affect sensor performance.
7. How much does it typically cost to repair OBDII code C12B1 on a 2016 Chevrolet Silverado?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve sensor replacement, wiring repairs, or recalibration, with costs ranging from a few hundred to over a thousand dollars.
8. Can a faulty brake pedal position sensor cause the ABS master cylinder pressure sensor issue on a 2016 Chevrolet Silverado?
- Yes, a faulty brake pedal position sensor can impact the data received by the ABS master cylinder pressure sensor, leading to the C12B1 fault code.
9. Is it safe to drive my 2016 Chevrolet Silverado if only one of the sensors related to code C12B1 is malfunctioning?
- It is not advisable to drive the vehicle if any sensor related to the C12B1 code is malfunctioning, as it can affect the proper functioning of the ABS system and compromise braking performance.
10. How long does it typically take to repair OBDII code C12B1 on a 2016 Chevrolet Silverado?
- The repair time can vary based on the exact cause of the issue and the availability of parts, but it may range from a few hours to a full day, depending on the complexity of the repair needed.
Discuss the causes and fixes for C12B1 2016 Chevrolet Silverado OBDII Code
Code C12B1 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
