C1290 Lexus Code - Steering Angle Sensor Zero Point Malfunction
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) acquires steering sensor zero point every time the ignition switch is turned to ON and the vehicle is driven at 35 km/h (22 mph) or more for approximately 5 seconds. Common causes include Yaw rate and deceleration sensor zero point calibration incomplete, Poor adjustment of centered position of the steering wheel, Poor adjustment of front wheel alignment. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1290 Lexus indicates Steering Angle Sensor Zero Point Malfunction.
- Common causes
- Common causes include Yaw rate and deceleration sensor zero point calibration incomplete, Poor adjustment of centered position of the steering wheel, Poor adjustment of front wheel alignment.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1290 Lexus Description
If front wheel alignment or steering wheel position is adjusted without disconnecting the negative battery terminal, or if the yaw rate and acceleration sensor zero point is not acquired after the adjustments have been completed, the Skid Control ECU (Brake Actuator Assembly) detects the difference between the previous zero point and newly acquired zero point and outputs this Diagnostic Trouble Code (DTC) to indicate a poor adjustment.
The steering sensor zero point malfunction warning will be canceled by turning the ignition switch off.
What are the Possible Causes of the DTC C1290 Lexus?
- Yaw rate and deceleration sensor zero point calibration incomplete
- Poor adjustment of centered position of the steering wheel
- Poor adjustment of front wheel alignment
How to Fix the DTC C1290 Lexus?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1290 Lexus code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1290 Lexus code?
Need more information on how to fix the C1290 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1290 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1290 Lexus Code
1. What does the OBDII code C1290 mean on a Lexus?
C1290 indicates a "Steering Angle Sensor Zero Point Malfunction," meaning the vehicle's stability control system has detected an issue with the calibration of the steering angle sensor.
2. What are common symptoms of the C1290 code on a Lexus?
Symptoms may include the traction control or stability control warning lights staying on, reduced or disabled stability control functions, and potential handling issues.
3. What causes the C1290 code to appear?
Common causes include an improperly calibrated steering angle sensor, misalignment in the steering system, low or uneven tire pressure, or a faulty steering angle sensor.
4. How is the C1290 code diagnosed?
Technicians use a scan tool to check for stored codes, inspect the steering angle sensor's functionality, verify calibration, and check for any misalignments or wiring issues.
5. Can uneven tire pressure trigger the C1290 code?
Yes, uneven or incorrect tire pressure can cause the steering angle sensor to misread and trigger the C1290 code.
6. How do you fix the C1290 code on a Lexus?
Repairs may involve recalibrating the steering angle sensor using a scan tool, correcting the wheel alignment, checking tire pressure, or replacing a faulty sensor if needed.
7. Can I drive with the C1290 code active?
While the car may still be drivable, the stability and traction control systems may not function correctly, which can increase the risk of losing control in certain driving conditions.
8. Is recalibrating the steering angle sensor difficult?
Recalibration typically requires a professional-grade scan tool and is a straightforward process for a qualified technician, though it may vary by Lexus model.
9. How much does it cost to repair a C1290 code on a Lexus?
The cost can range from $100 to $300, depending on whether recalibration, alignment, or sensor replacement is required.
10. Can an alignment issue cause the C1290 code?
Yes, improper wheel alignment can affect the steering angle sensor's readings and lead to the C1290 code.
Discuss the causes and fixes for C1290 Lexus OBDII Code
Code C1290 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
