AutoCodes – Toyota – C1290 2015 Toyota RAV4

C1290 2015 Toyota RAV4 Code - Steering Angle Sensor Zero Point Malfunction

Quick Answer

The Skid Control ECU (Brake Actuator Assembly) acquires steering sensor zero point every time the ignition switch is turned to ON and the vehicle is driven at 35 km/h (22 mph) or more for approximately 5 seconds. Common causes include Yaw rate and deceleration sensor zero point calibration incomplete, Poor adjustment of centered position of the steering wheel, Poor adjustment of front wheel alignment. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1290 2015 Toyota RAV4 indicates Steering Angle Sensor Zero Point Malfunction.
Common causes: Common causes include Yaw rate and deceleration sensor zero point calibration incomplete, Poor adjustment of centered position of the steering wheel, Poor adjustment of front wheel alignment.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 359

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 22, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1290 2015 Toyota RAV4 Description

The Skid Control ECU (Brake Actuator Assembly) acquires steering sensor zero point every time the ignition switch is turned to ON and the vehicle is driven at 35 km/h (22 mph) or more for approximately 5 seconds. The ECU also stores the previous zero point.
If front wheel alignment or steering wheel position is adjusted without disconnecting the negative battery terminal, or if the yaw rate and acceleration sensor zero point is not acquired after the adjustments have been completed, the Skid Control ECU (Brake Actuator Assembly) detects the difference between the previous zero point and newly acquired zero point and outputs this Diagnostic Trouble Code (DTC) to indicate a poor adjustment.
The steering sensor zero point malfunction warning will be canceled by turning the ignition switch off.

OBDII Code C1290 2015 Toyota RAV4 - Steering Angle Sensor Zero Point Malfunction - AutoCodes.com — C1290 2015 Toyota RAV4 Code - Steering Angle Sensor Zero Point Malfunction

What does this mean?

What are the Possible Causes of the DTC C1290 2015 Toyota RAV4?

Yaw rate and deceleration sensor zero point calibration incomplete
Poor adjustment of centered position of the steering wheel
Poor adjustment of front wheel alignment

How to Fix the DTC C1290 2015 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1290 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1290 2015 Toyota RAV4 code?

Need more information on how to fix the C1290 2015 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1290 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1290 2015 Toyota RAV4 Code

1. What are the common symptoms of OBDII code C1290 in a 2015 Toyota RAV4?

The common symptoms of OBDII code C1290 in a 2015 Toyota RAV4 include the ABS warning light staying on, traction control system malfunction, and potential loss of power steering assistance.

2. What does OBDII code C1290 indicate in a 2015 Toyota RAV4?

OBDII code C1290 in a 2015 Toyota RAV4 indicates a Steering Angle Sensor Zero Point Malfunction. This means there is an issue with the steering angle sensor's calibration.

3. What are the possible causes of the Steering Angle Sensor Zero Point Malfunction in a 2015 Toyota RAV4?

Possible causes of the Steering Angle Sensor Zero Point Malfunction in a 2015 Toyota RAV4 include a faulty steering angle sensor, damaged wiring or connectors related to the sensor, or a software glitch in the ABS or traction control system.

4. How can I diagnose the Steering Angle Sensor Zero Point Malfunction in my 2015 Toyota RAV4?

Diagnosing the Steering Angle Sensor Zero Point Malfunction in a 2015 Toyota RAV4 typically involves using an OBDII scanner to retrieve the specific trouble code, checking the sensor's wiring and connectors for any damage, and calibrating or replacing the sensor if necessary.

5. Can I continue driving my 2015 Toyota RAV4 with OBDII code C1290 present?

It is not recommended to continue driving your 2015 Toyota RAV4 with OBDII code C1290 present, as it can affect the proper functioning of the ABS and traction control systems, potentially compromising your vehicle's safety.

6. How can I reset the Steering Angle Sensor Zero Point Malfunction code in my 2015 Toyota RAV4?

To reset the Steering Angle Sensor Zero Point Malfunction code in a 2015 Toyota RAV4, you can use an OBDII scanner to clear the trouble code after addressing the underlying issue with the steering angle sensor.

7. Do I need to replace the steering angle sensor if I get the OBDII code C1290 in my 2015 Toyota RAV4?

In some cases, repairing the wiring or connectors related to the steering angle sensor and recalibrating it may resolve the issue without needing to replace the sensor. However, if the sensor is found to be faulty, it may need to be replaced.

8. How much does it typically cost to repair the Steering Angle Sensor Zero Point Malfunction in a 2015 Toyota RAV4?

The cost of repairing the Steering Angle Sensor Zero Point Malfunction in a 2015 Toyota RAV4 can vary depending on the underlying cause, but it may range from $200 to $500 for sensor replacement or recalibration, including parts and labor.

9. Can a DIY enthusiast fix the Steering Angle Sensor Zero Point Malfunction in a 2015 Toyota RAV4?

While diagnosing and repairing the Steering Angle Sensor Zero Point Malfunction may require some technical knowledge and specialized tools, experienced DIY enthusiasts may be able to address the issue by following repair guides specific to the 2015 Toyota RAV4 model.

10. Will the Steering Angle Sensor Zero Point Malfunction in my 2015 Toyota RAV4 cause any long-term damage if left unaddressed?

Leaving the Steering Angle Sensor Zero Point Malfunction unaddressed in a 2015 Toyota RAV4 can potentially lead to further issues with the ABS and traction control systems, affecting the vehicle's safety and performance. It is advisable to address this problem promptly to prevent any long-term damage.