C1283 2016 GMC Sierra Code - Brake Pressure Sensor Information Message Counter Incorrect
Quick Answer
The Electronic Brake Control Module uses inputs from the Electronic Brake Control Brake Pedal Position Sensor to determine when the brake is applied and how much force is used. Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1283 2016 GMC Sierra indicates Brake Pressure Sensor Information Message Counter Incorrect.
- Common causes
- Common causes include Faulty Electronic Brake Control Module (EBCM), Electronic Brake Control Module harness is open or shorted, Electronic Brake Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1283 2016 GMC Sierra Description
Brake pressure sensor information is communicated from the Electronic Brake Control Module (EBCM) to the Hybrid Control Processor (HCP). This information is used to schedule regenerative braking and engine autostops.
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects a corrupted data message from the Electronic Brake Control Module.
What are the Possible Causes of the DTC C1283 2016 GMC Sierra?
- Faulty Electronic Brake Control Module (EBCM)
- Electronic Brake Control Module harness is open or shorted
- Electronic Brake Control Module circuit poor electrical connection
- Faulty Starter/Generator Control Module
How to Fix the DTC C1283 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1283 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1283 2016 GMC Sierra code?
Need more information on how to fix the C1283 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1283 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1283 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code C1283 in a 2016 GMC Sierra?
The common symptoms include the illumination of the ABS warning light, a message indicating "Brake Pressure Sensor Information Message Counter Incorrect," and potential issues with the vehicle's brake system.
2. What does the OBDII code C1283 in a 2016 GMC Sierra mean?
The code C1283 indicates that the brake pressure sensor information message counter is incorrect. This can point to a problem with the brake pressure sensor or related components.
3. What are the possible causes of OBDII code C1283 in a 2016 GMC Sierra?
Possible causes include a faulty brake pressure sensor, damaged wiring or connectors in the brake system, low brake fluid levels, or issues with the ABS module.
4. How can I diagnose the OBDII code C1283 in my 2016 GMC Sierra?
Diagnosing this code typically involves using a diagnostic scanner to retrieve the specific fault codes, checking the brake pressure sensor and related components for any visible damage, and testing the wiring and connectors for continuity.
5. Can I still drive my 2016 GMC Sierra with OBDII code C1283?
It is not recommended to drive the vehicle with this code active, as it indicates a potential issue with the brake system that could affect its performance and safety. It's best to address the problem promptly.
6. How can I repair OBDII code C1283 in my 2016 GMC Sierra?
Repair options may include replacing the faulty brake pressure sensor, repairing damaged wiring or connectors, ensuring proper brake fluid levels, or addressing any issues with the ABS module as needed.
7. Is it safe to reset the OBDII code C1283 in my 2016 GMC Sierra without fixing the underlying issue?
Resetting the code without addressing the root cause may temporarily turn off the warning light, but the issue will likely reoccur. It's important to diagnose and repair the problem to ensure the vehicle's safety.
8. Can a DIY enthusiast fix OBDII code C1283 in a 2016 GMC Sierra?
Depending on their skill level and access to tools, a DIY enthusiast may be able to address this code by following proper diagnostic procedures and making the necessary repairs. However, if unsure, it's best to consult a professional mechanic.
9. How much does it cost to repair OBDII code C1283 in a 2016 GMC Sierra?
The cost of repair can vary based on the specific cause of the code and the needed repairs. Factors such as parts and labor costs will influence the overall expense, which is best determined by obtaining quotes from reputable repair shops.
10. How can I prevent OBDII code C1283 from appearing in my 2016 GMC Sierra?
Regular maintenance of the brake system, including checking brake fluid levels, inspecting sensor connections, and addressing any warning signs promptly, can help prevent issues that may trigger the C1283 fault code.
Discuss the causes and fixes for C1283 2016 GMC Sierra OBDII Code
Code C1283 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
