C1272 2013 Toyota RAV4 Code - Low Output Signal of Front Left Speed Sensor
Quick Answer
The speed sensor detects the wheel speed and sends the appropriate signals to the Skid Control ECU (Brake Actuator Assembly). Common causes include Faulty Front Speed Sensor Left, Front Speed Sensor Left Rotor (Front Axle Hub Sub-Assembly Left), Front Speed Sensor Left harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1272 2013 Toyota RAV4 indicates Low Output Signal of Front Left Speed Sensor.
- Common causes
- Common causes include Faulty Front Speed Sensor Left, Front Speed Sensor Left Rotor (Front Axle Hub Sub-Assembly Left), Front Speed Sensor Left harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1272 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC C1272 2013 Toyota RAV4?
- Faulty Front Speed Sensor Left
- Front Speed Sensor Left Rotor (Front Axle Hub Sub-Assembly Left)
- Front Speed Sensor Left harness is open or shorted
- Front Speed Sensor Left circuit poor electrical connection
How to Fix the DTC C1272 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
If there is iron powder sticking to the rotor, this will result in a malfunction, so confirm that the rotor is not contaminated with foreign material before replacing the sensor.
Check the speed sensor signal after cleaning or replacement.
On most vehicles, the Front Speed Sensor Rotor is incorporated into the Front Axle Hub Sub-Assembly. If the Speed Sensor Rotor needs to be replaced, replace it together with the Front Axle Hub Sub-Assembly.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1272 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1272 2013 Toyota RAV4 code?
Need more information on how to fix the C1272 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1272 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1272 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C1272 in a 2013 Toyota RAV4?
The common symptoms include issues with the ABS system, traction control system, or stability control system, as well as the illumination of the ABS warning light on the dashboard.
2. What does the OBDII code C1272 in a 2013 Toyota RAV4 indicate?
OBDII code C1272 indicates a low output signal from the front left speed sensor of the vehicle.
3. What are the possible causes of OBDII code C1272 in a 2013 Toyota RAV4?
Possible causes include a faulty front left speed sensor, damaged wiring or connectors related to the sensor, or issues with the ABS module.
4. How can I diagnose the low output signal of the front left speed sensor in my 2013 Toyota RAV4?
Diagnosing the issue involves inspecting the wiring and connectors for damage, testing the front left speed sensor for proper operation, and checking the ABS module for any faults.
5. Can I still drive my 2013 Toyota RAV4 with OBDII code C1272 present?
It is not recommended to drive the vehicle with OBDII code C1272 present, as it can affect the performance of the ABS, traction control, and stability control systems, compromising safety.
6. How can I repair OBDII code C1272 in my 2013 Toyota RAV4?
Repairing the issue may involve replacing the front left speed sensor, repairing or replacing damaged wiring or connectors, or addressing any faults in the ABS module.
7. Is it possible to reset OBDII code C1272 in a 2013 Toyota RAV4 without fixing the underlying issue?
While it is possible to clear the code temporarily, it will likely reappear until the root cause of the low output signal from the front left speed sensor is addressed.
8. Are there any DIY tips for troubleshooting OBDII code C1272 in a 2013 Toyota RAV4?
DIY tips include visually inspecting the sensor, wiring, and connectors for any visible damage, using a multimeter to test the sensor's output, and checking for any loose connections.
9. How much does it typically cost to repair OBDII code C1272 in a 2013 Toyota RAV4?
The cost of repair can vary depending on the specific issue, but it may involve parts and labor costs associated with replacing the speed sensor, repairing wiring, or addressing faults in the ABS module.
10. Can a professional mechanic help diagnose and repair OBDII code C1272 in a 2013 Toyota RAV4?
Yes, a professional mechanic with experience in ABS systems can diagnose and repair OBDII code C1272 in a 2013 Toyota RAV4 efficiently and effectively.
Discuss the causes and fixes for C1272 2013 Toyota RAV4 OBDII Code
Code C1272 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
