C1271 2013 Toyota RAV4 Code - Low Output Signal of Front Right Speed Sensor
Quick Answer
The speed sensor detects the wheel speed and sends the appropriate signals to the Skid Control ECU (Brake Actuator Assembly). Common causes include Faulty Front Speed Sensor Right, Front Speed Sensor Right Rotor (Front Axle Hub Sub-Assembly Right), Front Speed Sensor Right harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1271 2013 Toyota RAV4 indicates Low Output Signal of Front Right Speed Sensor.
- Common causes
- Common causes include Faulty Front Speed Sensor Right, Front Speed Sensor Right Rotor (Front Axle Hub Sub-Assembly Right), Front Speed Sensor Right harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1271 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC C1271 2013 Toyota RAV4?
- Faulty Front Speed Sensor Right
- Front Speed Sensor Right Rotor (Front Axle Hub Sub-Assembly Right)
- Front Speed Sensor Right harness is open or shorted
- Front Speed Sensor Right circuit poor electrical connection
How to Fix the DTC C1271 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
If there is iron powder sticking to the rotor, this will result in a malfunction, so confirm that the rotor is not contaminated with foreign material before replacing the sensor.
Check the speed sensor signal after cleaning or replacement.
On most vehicles, the Front Speed Sensor Rotor is incorporated into the Front Axle Hub Sub-Assembly. If the Speed Sensor Rotor needs to be replaced, replace it together with the Front Axle Hub Sub-Assembly.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1271 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1271 2013 Toyota RAV4 code?
Need more information on how to fix the C1271 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1271 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1271 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C1271 in a 2013 Toyota RAV4?
- Common symptoms include the ABS warning light being illuminated on the dashboard, traction control issues, and potential loss of stability control.
2. What does the OBDII code C1271 indicate in a 2013 Toyota RAV4?
- The code C1271 points to a low output signal from the front right speed sensor in the vehicle's anti-lock braking system (ABS).
3. What are the possible causes of the low output signal from the front right speed sensor in a 2013 Toyota RAV4?
- Potential causes include a faulty front right speed sensor, damaged wiring or connectors, a malfunctioning ABS module, or issues with the wheel bearing.
4. How can I diagnose the OBDII code C1271 in my 2013 Toyota RAV4?
- Diagnosis involves checking the front right speed sensor for proper functioning, inspecting the wiring and connectors for damage, testing the ABS module, and ensuring the wheel bearing is in good condition.
5. Can I still drive my 2013 Toyota RAV4 with the OBDII code C1271 present?
- It is not recommended to drive the vehicle with the C1271 code active, as it can affect the proper functioning of the ABS, traction control, and stability control systems, potentially compromising safety.
6. How can I repair the low output signal from the front right speed sensor in my 2013 Toyota RAV4?
- Repair may involve replacing the front right speed sensor, repairing or replacing damaged wiring or connectors, addressing issues with the ABS module, or inspecting and potentially replacing the wheel bearing.
7. Is it possible to reset the OBDII code C1271 in a 2013 Toyota RAV4 by disconnecting the battery?
- While disconnecting the battery may clear the code temporarily, it is not a recommended method as the underlying issue causing the code will still persist and may trigger the code again once the system is back in operation.
8. How much does it typically cost to repair the front right speed sensor issue in a 2013 Toyota RAV4?
- The cost of repair can vary depending on the specific cause of the issue, but it may range from a few hundred dollars for a simple sensor replacement to over a thousand dollars if additional components need to be addressed.
9. Can I use a generic OBDII scanner to read and clear the C1271 code in my 2013 Toyota RAV4?
- Yes, a generic OBDII scanner should be able to read and clear the C1271 code, but it may not provide detailed manufacturer-specific information or diagnostic capabilities.
10. How often does the front right speed sensor issue occur in 2013 Toyota RAV4 vehicles?
- The front right speed sensor issue leading to code C1271 is relatively uncommon, but it can occur due to various factors such as wear and tear, electrical faults, or sensor malfunctions.
Discuss the causes and fixes for C1271 2013 Toyota RAV4 OBDII Code
Code C1271 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
