AutoCodesScion – C1256 Scion

C1256 Scion Code - Accumulator Low Pressure

Quick Answer

The Accumulator Pressure Sensor is built into the actuator and detects the accumulator pressure. Common causes include Faulty Accumulator Pressure Sensor, Accumulator Pressure Sensor harness is open or shorted, Accumulator Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1256 Scion indicates Accumulator Low Pressure.
Common causes
Common causes include Faulty Accumulator Pressure Sensor, Accumulator Pressure Sensor harness is open or shorted, Accumulator Pressure Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,068
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 31, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1256 Scion Description

The Accumulator Pressure Sensor is built into the actuator and detects the accumulator pressure. The Accumulator Pressure Sensor is connected to the Skid Control ECU in the master cylinder solenoid. The Skid Control ECU Module monitors the Accumulator Pressure Sensor. The Skid Control ECU sets the OBDII code if it senses a decrease in the accumulator pressure.
OBDII Code C1256 Scion - Accumulator Low Pressure - AutoCodes.com
C1256 Scion Code - Accumulator Low Pressure

What are the Possible Causes of the DTC C1256 Scion?

  • Faulty Accumulator Pressure Sensor
  • Accumulator Pressure Sensor harness is open or shorted
  • Accumulator Pressure Sensor circuit poor electrical connection
  • Faulty Skid Control ECU

How to Fix the DTC C1256 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1256 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1256 Scion code?

Need more information on how to fix the C1256 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1256 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1256 Scion Code

1. What does the OBDII code C1256 mean on a Scion?

C1256 indicates "Accumulator Low Pressure," which means the brake system's hydraulic pressure is lower than required, often related to the brake booster or ABS system.

2. What are the common symptoms of code C1256 in a Scion?

Symptoms may include the ABS warning light or brake warning light on, reduced braking efficiency, or a noticeable change in brake pedal feel.

3. What causes the C1256 error code on a Scion?

Common causes include a faulty brake accumulator, a failing brake booster pump, leaks in the hydraulic system, or low brake fluid levels.

4. Is it safe to drive a Scion with the C1256 code?

No, it is not safe to drive with C1256 active. The reduced hydraulic pressure could lead to compromised braking performance, increasing the risk of an accident.

5. Can low brake fluid cause the C1256 code on a Scion?

Yes, low brake fluid levels can trigger the C1256 code because the system may struggle to maintain adequate hydraulic pressure.

6. How can I fix the C1256 code on my Scion?

Start by checking and refilling brake fluid if low. If that doesn’t resolve the issue, inspect the brake accumulator and pump for faults or leaks and replace them as needed.

7. How much does it cost to repair a C1256 code on a Scion?

Repair costs can vary but typically range from $300 to $1,000, depending on whether the brake accumulator, booster pump, or other components need replacement.

8. Can a weak battery cause the C1256 code in a Scion?

A weak battery can sometimes contribute to this code if the brake booster pump doesn’t receive enough power, but it’s not a common cause.

9. How do I reset the C1256 code on a Scion?

After repairing the underlying issue, you can reset the code using an OBDII scanner. However, if the issue persists, the code will return.

10. Can a worn-out brake booster pump cause C1256 on a Scion?

Yes, a failing brake booster pump can prevent the system from maintaining proper hydraulic pressure, leading to the C1256 code.

Discuss the causes and fixes for C1256 Scion OBDII Code

Code C1256 Scion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play