AutoCodesToyota – C1254 Toyota

C1254 Toyota Code - Pressure Switch Circuit

Quick Answer

The Accumulator Pressure Switch is connected to the Skid Control ECU in the Master Cylinder Solenoid (Brake Actuator Assembly). Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1254 Toyota indicates Pressure Switch Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly), Skid Control ECU harness is open or shorted, Skid Control ECU circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,127
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 14, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1254 Toyota Description

The Accumulator Pressure Switch is connected to the Skid Control ECU in the Master Cylinder Solenoid (Brake Actuator Assembly). The Diagnostic Trouble Code (DTC) will be set when there is a fault in the Accumulator Pressure Switch, the fluid pressure does not change when it should.
OBDII Code C1254 Toyota - Pressure Switch Circuit - AutoCodes.com
C1254 Toyota Code - Pressure Switch Circuit

What are the Possible Causes of the DTC C1254 Toyota?

  • Faulty Skid Control ECU (Brake Actuator Assembly)
  • Skid Control ECU harness is open or shorted
  • Skid Control ECU circuit poor electrical connection

How to Fix the DTC C1254 Toyota?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1254 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1254 Toyota code?

Need more information on how to fix the C1254 Toyota code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1254 Toyota code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1254 Toyota Code

1. What does the OBDII code C1254 mean on a Toyota?

C1254 is a diagnostic trouble code indicating an issue with the pressure switch circuit in the vehicle's brake system.

2. What are the common symptoms of code C1254 in a Toyota?

Common symptoms include the ABS warning light or brake warning light illuminating and potential loss of ABS functionality.

3. What causes the C1254 code to appear in a Toyota?

The code is typically triggered by a malfunctioning pressure switch, wiring issues, or a problem with the brake booster or ABS module.

4. Can I drive my Toyota with the C1254 code active?

While you can drive the vehicle, it is not recommended as the ABS system may not function properly, increasing the risk of skidding during hard braking.

5. How do I diagnose the C1254 code in my Toyota?

Start by checking the pressure switch and its wiring for damage or loose connections, then use a scan tool to verify the fault and perform further tests.

6. Is a faulty ABS module a possible cause for the C1254 code?

Yes, a failing ABS module can cause the C1254 code, but it is less common than a pressure switch or wiring issue.

7. How can I fix the C1254 code on my Toyota?

Repairs may involve replacing the pressure switch, repairing damaged wiring, or addressing issues with the ABS module if necessary.

8. What tools are needed to troubleshoot the C1254 code in a Toyota?

You’ll need a scan tool to read and clear codes, a multimeter to test wiring and circuits, and potentially a repair manual for reference.

9. How much does it cost to fix the C1254 code on a Toyota?

Repair costs can vary but typically range from $100 to $400, depending on whether the issue is with the pressure switch, wiring, or ABS module.

10. Can a low brake fluid level cause the C1254 code?

No, low brake fluid does not directly cause the C1254 code, but it can trigger other brake-related codes and warnings.

Discuss the causes and fixes for C1254 Toyota OBDII Code

Code C1254 Toyota comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play