C1246 Toyota Code - Master Cylinder Pressure Sensor Malfunction
Quick Answer
The Master Cylinder Pressure Sensor and the Wheel Cylinder Pressure Sensor are built into the Brake Actuator. Common causes include Faulty Skid Control ECU or Brake Actuator, Skid Control ECU or Brake Actuator harness is open or shorted, Skid Control ECU or Brake Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1246 Toyota indicates Master Cylinder Pressure Sensor Malfunction.
- Common causes
- Common causes include Faulty Skid Control ECU or Brake Actuator, Skid Control ECU or Brake Actuator harness is open or shorted, Skid Control ECU or Brake Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1246 Toyota Description
What are the Possible Causes of the DTC C1246 Toyota?
- Faulty Skid Control ECU or Brake Actuator
- Skid Control ECU or Brake Actuator harness is open or shorted
- Skid Control ECU or Brake Actuator circuit poor electrical connection
How to Fix the DTC C1246 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1246 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1246 Toyota code?
Need more information on how to fix the C1246 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1246 Toyota code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1246 Toyota Code
1. What does OBDII code C1246 for Toyota indicate?
The code C1246 indicates a malfunction in the Master Cylinder Pressure Sensor in Toyota vehicles.
2. What are common symptoms of a Master Cylinder Pressure Sensor malfunction?
Common symptoms include the ABS warning light being illuminated on the dashboard and potential loss of ABS functionality.
3. What are the possible causes of the C1246 code in Toyota vehicles?
The code C1246 can be triggered by issues such as a faulty master cylinder pressure sensor, damaged wiring or connectors, or a problem with the ABS system.
4. How can I diagnose a Master Cylinder Pressure Sensor malfunction in my Toyota?
Diagnosing the issue involves using an OBDII scanner to retrieve the specific code, inspecting the sensor and its connections, and performing a brake system inspection.
5. Can I continue driving my Toyota with the C1246 code present?
It is not recommended to drive your Toyota with the C1246 code present, as it can affect the proper functioning of the ABS system and compromise braking performance.
6. How can I repair a Master Cylinder Pressure Sensor malfunction in my Toyota?
Repairing the issue may involve replacing the faulty pressure sensor, repairing damaged wiring or connectors, or addressing any underlying problems in the ABS system.
7. Are there any DIY tips for addressing the C1246 code in a Toyota?
DIY tips include checking the sensor connections for any visible damage, ensuring proper brake fluid levels, and consulting the vehicle's service manual for specific troubleshooting steps.
8. Is it necessary to reset the OBDII code after fixing the Master Cylinder Pressure Sensor issue?
Yes, it is recommended to reset the OBDII code after resolving the Master Cylinder Pressure Sensor problem to clear the error code and ensure proper functioning of the ABS system.
9. Can a mechanic help me diagnose and repair the C1246 code in my Toyota?
Yes, a qualified mechanic with experience in ABS systems can diagnose the issue using specialized tools and repair the Master Cylinder Pressure Sensor problem effectively.
10. Is it important to address the C1246 code promptly in my Toyota?
Yes, addressing the C1246 code promptly is crucial to ensure the safety and performance of your vehicle's braking system and prevent potential ABS malfunctions.
Discuss the causes and fixes for C1246 Toyota OBDII Code
-
my toyota altis 2002 model always on light hand break amd flushing light of abs light signal when i drive 30km the speed sensor speedometer drop to zero
-
The symptoms you’re describing on your 2002 Toyota Altis—hand brake light always on, ABS light flashing, and the speedometer dropping to zero—are likely related to a malfunction in the ABS and braking systems. The C1246 code indicates an issue with the Master Cylinder Pressure Sensor, which monitors brake pressure for proper ABS function. Here's how to address the issue:
Possible Causes:
- Faulty Master Cylinder Pressure Sensor.
- Wiring or connector issues related to the pressure sensor or ABS module.
- Failing or dirty ABS wheel speed sensors.
- Low or contaminated brake fluid.
- Malfunctioning ABS module.
Diagnostic Steps:
- Check Brake Fluid Level: Ensure the brake fluid is at the correct level and is clean. Refill or replace if needed.
- Inspect Wiring and Connectors: Look for corrosion, loose connections, or damage in the wiring leading to the master cylinder pressure sensor and ABS module.
- Test the Master Cylinder Pressure Sensor: Use a multimeter to measure sensor output or check with a scan tool for live data.
- Inspect ABS Speed Sensors: Check the wheel speed sensors for dirt, damage, or loose connections, as these may explain the speedometer issue.
- Scan for Additional Codes: Use an OBDII scanner to check if there are related codes for the ABS or wheel speed sensors.
Repair Steps:
- Replace the Master Cylinder Pressure Sensor if it is found to be faulty.
- Clean or replace damaged wheel speed sensors to restore proper speedometer function.
- Repair or replace any damaged wiring or connectors in the ABS and pressure sensor circuits.
- Bleed the brake system if air or contamination is found in the fluid.
Additional Tips:
After repairs, clear the codes and test drive the car to confirm the issue is resolved. If the ABS module itself is faulty, it may need to be repaired or replaced. If unsure, consult a professional mechanic to avoid further brake system issues.
-
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
