C1245 2016 Toyota RAV4 Code - Acceleration Sensor Output Malfunction
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) receives signals from the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) via the Controller Area Network (CAN) communication system. Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1245 2016 Toyota RAV4 indicates Acceleration Sensor Output Malfunction.
- Common causes
- Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1245 2016 Toyota RAV4 Description
The Airbag Sensor Assembly has a built-in Yaw Rate Sensor and Acceleration Sensor and detects the vehicle's condition.
If there is trouble in the bus lines between the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) and the CAN communication system, the Diagnostic Trouble Code (DTC) U0124 (malfunction in CAN communication with the acceleration sensor) is output.
These DTCs are also output when calibration has not been completed.
What are the Possible Causes of the DTC C1245 2016 Toyota RAV4?
- Acceleration Sensor Calibration
- Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly)
- Airbag Sensor Assembly harness is open or shorted
- Airbag Sensor Assembly circuit poor electrical connection
How to Fix the DTC C1245 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1245 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1245 2016 Toyota RAV4 code?
Need more information on how to fix the C1245 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1245 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1245 2016 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C1245 in a 2016 Toyota RAV4?
- The common symptoms include issues with the vehicle's acceleration, erratic speedometer readings, and potential stability control system malfunctions.
2. What does the OBDII code C1245 indicate in a 2016 Toyota RAV4?
- OBDII code C1245 indicates an Acceleration Sensor Output Malfunction in the Toyota RAV4's system.
3. What are the possible causes of OBDII code C1245 in a 2016 Toyota RAV4?
- Possible causes of this code include a faulty acceleration sensor, damaged wiring or connectors, or issues with the stability control system.
4. How can I diagnose the Acceleration Sensor Output Malfunction in my 2016 Toyota RAV4?
- Diagnosing this issue typically involves using a diagnostic scanner to retrieve the OBDII code, inspecting the sensor and its connections, and performing a road test to verify the symptoms.
5. Can I continue driving my 2016 Toyota RAV4 with OBDII code C1245?
- It is not recommended to drive the vehicle with this code present, as it can affect the vehicle's acceleration and stability control system, potentially compromising safety.
6. How can I repair OBDII code C1245 in my 2016 Toyota RAV4?
- Repairing this code may involve replacing the faulty acceleration sensor, repairing damaged wiring or connectors, and resetting the system to clear the code.
7. Is it possible to reset OBDII code C1245 in a 2016 Toyota RAV4 without fixing the issue?
- While you can clear the code using a diagnostic scanner, it is crucial to address the underlying issue causing the Acceleration Sensor Output Malfunction to prevent further problems.
8. Are there any DIY tips for resolving OBDII code C1245 in a 2016 Toyota RAV4?
- DIY tips include checking the sensor connections for any loose or damaged wires, ensuring proper sensor alignment, and conducting a careful visual inspection before seeking professional help.
9. How much does it cost to repair OBDII code C1245 in a 2016 Toyota RAV4?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve sensor replacement, wiring repairs, and diagnostic labor charges, potentially ranging from $200 to $600.
10. Can a 2016 Toyota RAV4 owner prevent OBDII code C1245 from occurring?
- While some causes of this code may be unavoidable, regular vehicle maintenance, prompt attention to warning signs, and careful driving habits can help prevent issues that lead to the Acceleration Sensor Output Malfunction.
Discuss the causes and fixes for C1245 2016 Toyota RAV4 OBDII Code
Code C1245 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
