C1245 2014 Toyota RAV4 Code - Acceleration Sensor Output Malfunction
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) receives signals from the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) via the Controller Area Network (CAN) communication system. Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1245 2014 Toyota RAV4 indicates Acceleration Sensor Output Malfunction.
- Common causes
- Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1245 2014 Toyota RAV4 Description
The Airbag Sensor Assembly has a built-in Yaw Rate Sensor and Acceleration Sensor and detects the vehicle's condition.
If there is trouble in the bus lines between the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) and the CAN communication system, the Diagnostic Trouble Code (DTC) U0124 (malfunction in CAN communication with the acceleration sensor) is output.
These DTCs are also output when calibration has not been completed.
What are the Possible Causes of the DTC C1245 2014 Toyota RAV4?
- Acceleration Sensor Calibration
- Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly)
- Airbag Sensor Assembly harness is open or shorted
- Airbag Sensor Assembly circuit poor electrical connection
How to Fix the DTC C1245 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1245 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1245 2014 Toyota RAV4 code?
Need more information on how to fix the C1245 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1245 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1245 2014 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C1245 in a 2014 Toyota RAV4?
The common symptoms include issues with the vehicle's stability control system, traction control system, and potential illumination of the ABS warning light.
2. What does the OBDII code C1245 in a 2014 Toyota RAV4 indicate?
The code C1245 indicates an Acceleration Sensor Output Malfunction within the vehicle's stability control system.
3. What are some possible causes of the C1245 code in a 2014 Toyota RAV4?
Possible causes of the C1245 code include a faulty acceleration sensor, damaged wiring or connectors, or issues with the stability control module.
4. How can I diagnose the C1245 code in my 2014 Toyota RAV4?
Diagnosing the C1245 code typically involves using a diagnostic scanner to retrieve the code, inspecting the stability control system components, and testing the acceleration sensor for proper functionality.
5. Is it safe to drive my 2014 Toyota RAV4 with the C1245 code present?
It is generally not recommended to drive the vehicle with the C1245 code active, as it may affect the stability and traction control systems, compromising the vehicle's safety.
6. Can I repair the C1245 code in my 2014 Toyota RAV4 myself?
While basic checks like inspecting wiring and connectors can be done by DIY enthusiasts, diagnosing and repairing the specific cause of the C1245 code may require professional expertise and specialized tools.
7. How much does it typically cost to repair the C1245 code in a 2014 Toyota RAV4?
The cost of repairing the C1245 code can vary depending on the underlying cause, but it may involve replacing the acceleration sensor, repairing wiring, or addressing issues with the stability control module.
8. Will resetting the OBDII system clear the C1245 code in my 2014 Toyota RAV4?
Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the system detects the fault again.
9. How urgent is it to address the C1245 code in a 2014 Toyota RAV4?
It is recommended to address the C1245 code promptly to ensure the proper functioning of the vehicle's stability control system and maintain optimal safety while driving.
10. Can the C1245 code in a 2014 Toyota RAV4 cause any long-term damage if left unresolved?
Leaving the C1245 code unresolved can potentially lead to further damage to the vehicle's stability control system and compromise the overall safety and performance of the vehicle.
Discuss the causes and fixes for C1245 2014 Toyota RAV4 OBDII Code
Code C1245 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
