C1245 2013 Toyota RAV4 Code - Acceleration Sensor Output Malfunction
Quick Answer
The Skid Control ECU (Brake Actuator Assembly) receives signals from the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) via the Controller Area Network (CAN) communication system. Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1245 2013 Toyota RAV4 indicates Acceleration Sensor Output Malfunction.
- Common causes
- Common causes include Acceleration Sensor Calibration, Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly), Airbag Sensor Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1245 2013 Toyota RAV4 Description
The Airbag Sensor Assembly has a built-in Yaw Rate Sensor and Acceleration Sensor and detects the vehicle's condition.
If there is trouble in the bus lines between the Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly) and the CAN communication system, the Diagnostic Trouble Code (DTC) U0124 (malfunction in CAN communication with the acceleration sensor) is output.
These DTCs are also output when calibration has not been completed.
What are the Possible Causes of the DTC C1245 2013 Toyota RAV4?
- Acceleration Sensor Calibration
- Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly)
- Airbag Sensor Assembly harness is open or shorted
- Airbag Sensor Assembly circuit poor electrical connection
How to Fix the DTC C1245 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1245 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1245 2013 Toyota RAV4 code?
Need more information on how to fix the C1245 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1245 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1245 2013 Toyota RAV4 Code
1. What does OBDII code C1245 mean for a 2013 Toyota RAV4?
Code C1245 indicates an Acceleration Sensor Output Malfunction in the vehicle's system.
2. What are the common symptoms of OBDII code C1245 in a 2013 Toyota RAV4?
Common symptoms may include issues with the vehicle's stability control system, traction control system, or ABS warning lights illuminated on the dashboard.
3. What are the possible causes of OBDII code C1245 in a 2013 Toyota RAV4?
Possible causes of code C1245 can include a faulty acceleration sensor, damaged wiring or connectors related to the sensor, or a malfunction in the vehicle's stability control system.
4. How can I diagnose the OBDII code C1245 in my 2013 Toyota RAV4?
Diagnosing code C1245 typically involves using a diagnostic scanner to retrieve the code and then inspecting the acceleration sensor and its wiring for any visible damage or issues.
5. Can I still drive my 2013 Toyota RAV4 with OBDII code C1245?
It is not recommended to drive the vehicle with code C1245 present, as it can affect the stability and control of the vehicle, potentially leading to unsafe driving conditions.
6. How can I repair OBDII code C1245 in my 2013 Toyota RAV4?
Repairing code C1245 may involve replacing the faulty acceleration sensor, repairing damaged wiring or connectors, or addressing any underlying issues with the vehicle's stability control system.
7. Is it necessary to reset the OBDII code C1245 after repairs are made?
Yes, it is recommended to reset the code after repairs are completed to clear the fault from the vehicle's system and ensure proper functionality.
8. Can a DIY enthusiast fix OBDII code C1245 in a 2013 Toyota RAV4?
While some enthusiasts may have the skills to diagnose and repair code C1245, it is advisable to seek professional help, especially when dealing with sensitive vehicle systems like acceleration sensors.
9. How much does it cost to fix OBDII code C1245 in a 2013 Toyota RAV4?
The cost of fixing code C1245 can vary depending on the exact cause of the issue, but it may involve sensor replacement, wiring repairs, or system diagnostics, which can range from moderate to high in cost.
10. How can I prevent OBDII code C1245 from reoccurring in my 2013 Toyota RAV4?
Regular maintenance, such as inspecting and replacing sensors as needed, addressing wiring issues promptly, and ensuring proper functioning of the stability control system, can help prevent code C1245 from reoccurring.
Discuss the causes and fixes for C1245 2013 Toyota RAV4 OBDII Code
Code C1245 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
