C1227 Toyota Code - SA3 Solenoid Circuit
Quick Answer
The SA3 Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1227 Toyota indicates SA3 Solenoid Circuit.
- Common causes
- Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1227 Toyota Description
What are the Possible Causes of the DTC C1227 Toyota?
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C1227 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1227 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1227 Toyota code?
Need more information on how to fix the C1227 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1227 Toyota code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1227 Toyota Code
1. What does the OBDII code C1227 mean on a Toyota?
C1227 indicates a malfunction in the SA3 solenoid circuit, which is typically part of the vehicle's ABS (Anti-lock Braking System).
2. What are the symptoms of the C1227 code in a Toyota?
Common symptoms include the ABS warning light illuminating, reduced braking efficiency, or the ABS system not functioning properly.
3. What causes the C1227 code to trigger?
The code can be caused by a faulty SA3 solenoid, damaged wiring or connectors, a malfunctioning ABS control module, or corrosion in the circuit.
4. Can I drive my Toyota with the C1227 code active?
While the vehicle may still be drivable, the ABS system may not function properly, increasing the risk of wheel lock-up during hard braking.
5. How is the C1227 code diagnosed in a Toyota?
A mechanic will use a scan tool to read the code, inspect the SA3 solenoid and its circuit for damage or disconnection, and test the ABS control module.
6. How can the C1227 code be fixed?
Repairs may include replacing the SA3 solenoid, repairing or replacing damaged wiring, cleaning corroded connectors, or replacing the ABS control module if necessary.
7. What tools are needed to fix the C1227 code?
Common tools include a diagnostic scan tool, a multimeter for testing electrical connections, and basic hand tools for component replacement.
8. How much does it cost to repair the C1227 code on a Toyota?
Repair costs vary depending on the root cause but typically range from $150 to $800, including parts and labor.
9. Can clearing the C1227 code solve the issue?
Clearing the code will reset the warning light temporarily, but the issue will return if the underlying problem is not fixed.
10. What preventative maintenance can help avoid the C1227 code?
Regular inspections of the ABS system, cleaning electrical connections, and promptly addressing ABS warning lights can help prevent this issue.
Discuss the causes and fixes for C1227 Toyota OBDII Code
Code C1227 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
