AutoCodesToyota – C1225 2013 Toyota RAV4

C1225 2013 Toyota RAV4 Code - SM Solenoid Circuit

Quick Answer

The SM Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. Common causes include Faulty Skid Control ECU (Brake Actuator Assembly). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1225 2013 Toyota RAV4 indicates SM Solenoid Circuit.
Common causes
Common causes include Faulty Skid Control ECU (Brake Actuator Assembly).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 340
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 18, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1225 2013 Toyota RAV4 Description

The SM Solenoid turns on when the signal is received from the Skid Control ECU (Brake Actuator Assembly) and they control the pressure acting on the wheel cylinders to control the braking force. The Skid Control ECU (Brake Actuator Assembly) monitors the SM Solenoid. The Skid Control ECU (Brake Actuator Assembly) sets the Diagnostic Trouble Code (DTC) when the SM Solenoid is not to factory specifications.
OBDII Code C1225 2013 Toyota RAV4 - SM Solenoid Circuit - AutoCodes.com
C1225 2013 Toyota RAV4 Code - SM Solenoid Circuit

What are the Possible Causes of the DTC C1225 2013 Toyota RAV4?

  • Faulty Skid Control ECU (Brake Actuator Assembly)

How to Fix the DTC C1225 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1225 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1225 2013 Toyota RAV4 code?

Need more information on how to fix the C1225 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1225 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1225 2013 Toyota RAV4 Code

1. What does the OBDII code C1225 mean on a 2013 Toyota RAV4?

C1225 indicates a malfunction in the SM (Solenoid Motor) solenoid circuit, which is part of the vehicle's ABS (Anti-lock Braking System).

2. What are common symptoms of the C1225 code on a 2013 Toyota RAV4?

Common symptoms include the ABS warning light turning on, reduced braking performance, or the ABS system not functioning properly.

3. What causes the C1225 code to appear on a Toyota RAV4?

Potential causes include a faulty SM solenoid, damaged wiring or connectors in the solenoid circuit, or a malfunctioning ABS control module.

4. Can I still drive my 2013 Toyota RAV4 with the C1225 code?

While the vehicle may still be drivable, it is not recommended to ignore the issue as the ABS system may not function correctly, impacting braking safety.

5. How can I diagnose the C1225 code on my Toyota RAV4?

Use an OBDII scanner to confirm the code, then visually inspect the SM solenoid, wiring, and connectors for damage or wear. Test the solenoid’s functionality using a multimeter if needed.

6. How do I fix the C1225 code on a 2013 Toyota RAV4?

Repairs may include replacing the faulty SM solenoid, repairing or replacing damaged wiring or connectors, or addressing issues with the ABS control module.

7. What tools are needed to fix the C1225 code?

You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools to inspect and repair wiring or replace components.

8. Does the C1225 code always mean the SM solenoid is bad?

Not necessarily. The issue could also stem from faulty wiring, poor electrical connections, or a problem with the ABS control module.

9. How much does it cost to repair the C1225 code on a 2013 Toyota RAV4?

Repair costs vary depending on the cause but typically range from $100 to $500, including parts and labor.

10. Will clearing the C1225 code fix the problem?

Clearing the code will turn off the warning light temporarily, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for C1225 2013 Toyota RAV4 OBDII Code

Code C1225 2013 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play