C121C Dodge Code - Torque Request Signal Denied
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Yaw Control/Traction Control System. Common causes include Faulty Anti-Lock Brake System (ABS) Module, Faulty Powertrain Control Module (PCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C121C Dodge indicates Torque Request Signal Denied.
- Common causes
- Common causes include Faulty Anti-Lock Brake System (ABS) Module, Faulty Powertrain Control Module (PCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C121C Dodge Description
What are the Possible Causes of the DTC C121C Dodge?
- Faulty Anti-Lock Brake System (ABS) Module
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC C121C Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C121C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C121C Dodge code?
Need more information on how to fix the C121C Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C121C Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C121C Dodge Code
1. What are common symptoms of OBDII code C121C in a Dodge related to Torque Request Signal Denied?
- Common symptoms include rough idle, decreased engine performance, and the vehicle going into limp mode.
2. What could cause the Torque Request Signal Denied error code C121C in a Dodge?
- Possible causes include issues with the throttle body, electronic throttle control system, wiring harness, or software glitches.
3. How can I diagnose the Torque Request Signal Denied code C121C in my Dodge?
- Diagnosis typically involves using a professional OBDII scanner to read the code, checking for related codes, and inspecting the throttle body and related components.
4. Can a dirty throttle body trigger the C121C error code in a Dodge?
- Yes, a dirty throttle body can disrupt the signal flow and operation, potentially triggering the Torque Request Signal Denied code.
5. What are some repair tips for resolving the Torque Request Signal Denied issue in a Dodge?
- Repair tips may include cleaning the throttle body, inspecting and repairing any damaged wiring, updating software, or replacing faulty components.
6. Is it safe to continue driving with the C121C error code in my Dodge?
- It is not recommended to drive with this error code as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
7. Can resetting the error code temporarily fix the Torque Request Signal Denied problem?
- Resetting the code may temporarily clear the error, but if the underlying issue is not addressed, the code is likely to reappear.
8. How much does it typically cost to repair the Torque Request Signal Denied error code in a Dodge?
- The cost of repair can vary depending on the specific cause of the issue, but it may range from a simple DIY fix to a more involved professional repair that could cost a few hundred dollars.
9. Will the Torque Request Signal Denied code in a Dodge cause the check engine light to illuminate?
- Yes, this code typically triggers the check engine light to come on, indicating that there is a problem with the torque request signal.
10. Can a faulty throttle position sensor be a potential cause of the C121C error code in a Dodge?
- Yes, a faulty throttle position sensor can disrupt the signal flow and operation, potentially leading to the Torque Request Signal Denied code.
Discuss the causes and fixes for C121C Dodge OBDII Code
Code C121C Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
