C120B 2015 Toyota RAV4 Code - Ignition Supply Voltage Low
Quick Answer
The Diagnostic Trouble Code (DTC) will be set when the Master Cylinder Pressure Sensor power supply voltage decrease occurs, or a history of voltage decrease exists, and defective Master Cylinder Pressure Sensor output continues for 1 second or more. Common causes include Faulty Master Cylinder Pressure Sensor, Master Cylinder Pressure Sensor harness is open or shorted, Master Cylinder Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C120B 2015 Toyota RAV4 indicates Ignition Supply Voltage Low.
- Common causes
- Common causes include Faulty Master Cylinder Pressure Sensor, Master Cylinder Pressure Sensor harness is open or shorted, Master Cylinder Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C120B 2015 Toyota RAV4 Description
What are the Possible Causes of the DTC C120B 2015 Toyota RAV4?
- Faulty Master Cylinder Pressure Sensor
- Master Cylinder Pressure Sensor harness is open or shorted
- Master Cylinder Pressure Sensor circuit poor electrical connection
- Faulty Skid Control ECU (Brake Actuator Assembly)
How to Fix the DTC C120B 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C120B 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C120B 2015 Toyota RAV4 code?
Need more information on how to fix the C120B 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C120B 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C120B 2015 Toyota RAV4 Code
1. What are the common symptoms of OBDII code C120B in a 2015 Toyota RAV4?
The common symptoms of code C120B "Ignition Supply Voltage Low" in a 2015 Toyota RAV4 may include issues with starting the vehicle, dimming of dashboard lights, and potential stalling.
2. What are the possible causes of OBDII code C120B in a 2015 Toyota RAV4?
Possible causes of code C120B in a 2015 Toyota RAV4 include a weak or failing battery, faulty ignition switch, damaged wiring or connectors in the ignition system, or a malfunctioning ignition relay.
3. How can I diagnose OBDII code C120B in my 2015 Toyota RAV4?
To diagnose code C120B in a 2015 Toyota RAV4, you may need to use an OBDII scanner to retrieve the code and then perform a thorough inspection of the battery, ignition system components, and related wiring for any signs of damage or wear.
4. Can a weak battery cause OBDII code C120B in a 2015 Toyota RAV4?
Yes, a weak or failing battery can cause code C120B "Ignition Supply Voltage Low" in a 2015 Toyota RAV4 as it may not provide sufficient power to the ignition system, leading to voltage issues.
5. How can I repair OBDII code C120B in my 2015 Toyota RAV4?
Repairing code C120B in a 2015 Toyota RAV4 may involve replacing the battery if it is weak, checking and repairing any damaged wiring or connectors in the ignition system, or replacing faulty ignition components like the switch or relay.
6. Can a DIY enthusiast fix OBDII code C120B in a 2015 Toyota RAV4?
Depending on the root cause, a DIY enthusiast with some automotive repair knowledge may be able to address code C120B in a 2015 Toyota RAV4 by following repair guides, but complex electrical issues may require professional help.
7. Is it safe to continue driving with OBDII code C120B in a 2015 Toyota RAV4?
It is not advisable to continue driving with OBDII code C120B "Ignition Supply Voltage Low" in a 2015 Toyota RAV4 as it can lead to potential issues with starting the vehicle or cause the engine to stall unexpectedly.
8. How much can I expect to pay to repair OBDII code C120B in my 2015 Toyota RAV4?
The cost to repair code C120B in a 2015 Toyota RAV4 can vary depending on the underlying cause and whether you choose to DIY or seek professional help. Costs may range from a few dollars for simple fixes to a few hundred dollars for more complex repairs.
9. Are there any preventive measures to avoid OBDII code C120B in a 2015 Toyota RAV4?
Regular maintenance of the battery, ignition system, and related components in a 2015 Toyota RAV4 can help prevent issues that may trigger code C120B. Ensuring proper voltage supply and addressing any warning signs promptly can also help prevent this code from appearing.
Discuss the causes and fixes for C120B 2015 Toyota RAV4 OBDII Code
Code C120B 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
