C1175 JAGUAR - Left Rear Wheel Speed Sensor Input Circuit Failure
C1175 Jaguar DescriptionThe ABS module receives wheel speed readings from each wheel speed sensor and processes this information to determine if an ABS event is necessary. The wheel speed sensor detects the magnetic field of the sensor ring as it passes the face of the active wheel speed sensor.
The active wheel speed sensor generates a signal that is sent to the ABS module. The wheel speed sensor circuitry connects to the ABS module through 2 wires and a connector at each wheel speed sensor. When the ignition is turned to the RUN position, the ABS module carries out a self-test by sending a reference voltage to all of the wheel speed sensors through their circuitry to determine if they are functional.
The ABS module continuously monitors and compares the rotational speed of each wheel and when it detects an impending wheel lock, modulates brake pressure to the appropriate brake caliper. This is accomplished by triggering the hydraulic control unit (HCU) to open and close the appropriate solenoid valves. Once the affected wheel returns to normal speed, the ABS module returns the solenoid valves to their normal position and normal (base) braking resumes.
Need more help?Do you need more help with the C1175 Jaguar code? Ask a question to our users or find an automotive repair shop near you to help fix the OBDII code
C1175 JAGUAR CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C1175 Jaguar code? Have you replaced any parts?
Any information is appreciated. Thanks