C1136 Nissan Code - Engine Signal 6
Quick Answer
ABS Actuator and Electric Unit (Control Unit) and Engine Control Module (ECM) exchange the engine signal with Control Area Network (CAN) communication line. Common causes include Faulty Engine Control Module (ECM), Faulty ABS Actuator and Electric Unit (Control Unit), Control Area Network (CAN) communication line. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1136 Nissan indicates Engine Signal 6.
- Common causes
- Common causes include Faulty Engine Control Module (ECM), Faulty ABS Actuator and Electric Unit (Control Unit), Control Area Network (CAN) communication line.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1136 Nissan Description
What are the Possible Causes of the DTC C1136 Nissan?
- Faulty Engine Control Module (ECM)
- Faulty ABS Actuator and Electric Unit (Control Unit)
- Control Area Network (CAN) communication line
- Blown Engine Control Module (ECM) fuse
How to Fix the DTC C1136 Nissan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1136 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1136 Nissan code?
Need more information on how to fix the C1136 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1136 Nissan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1136 Nissan Code
1. What are the common symptoms of OBDII code C1136 Nissan (Engine Signal 6)?
The common symptoms of OBDII code C1136 Nissan (Engine Signal 6) may include rough idling, engine misfires, decreased fuel efficiency, and in some cases, the vehicle may go into limp mode.
2. What are the possible causes of OBDII code C1136 Nissan (Engine Signal 6)?
The possible causes of OBDII code C1136 Nissan (Engine Signal 6) can include a faulty ignition coil, damaged spark plugs, a malfunctioning throttle body, or issues with the engine control module (ECM).
3. How can I diagnose OBDII code C1136 Nissan (Engine Signal 6) at home?
You can diagnose OBDII code C1136 Nissan (Engine Signal 6) at home using an OBDII scanner to retrieve the trouble codes, visually inspecting the ignition system components, and checking for any loose or damaged connections.
4. Can a bad oxygen sensor trigger OBDII code C1136 Nissan (Engine Signal 6)?
While a bad oxygen sensor may not directly trigger OBDII code C1136 Nissan (Engine Signal 6), it can cause issues that may lead to this fault code, such as improper air-fuel mixture or engine misfires.
5. What is the typical repair process for OBDII code C1136 Nissan (Engine Signal 6)?
The typical repair process for OBDII code C1136 Nissan (Engine Signal 6) involves identifying the root cause of the issue, replacing any faulty components like ignition coils or spark plugs, and clearing the trouble codes with an OBDII scanner.
6. Can driving with OBDII code C1136 Nissan (Engine Signal 6) cause further damage to the vehicle?
Continuing to drive with OBDII code C1136 Nissan (Engine Signal 6) can potentially cause further damage to the engine, reduce fuel efficiency, and lead to more severe issues over time if the underlying problem is not addressed promptly.
7. Is it safe to reset OBDII code C1136 Nissan (Engine Signal 6) and continue driving?
Resetting OBDII code C1136 Nissan (Engine Signal 6) without fixing the underlying issue is not recommended, as the problem may persist and trigger the code again, potentially causing performance issues or damage to the vehicle.
8. How much does it typically cost to repair OBDII code C1136 Nissan (Engine Signal 6) at a mechanic?
The cost to repair OBDII code C1136 Nissan (Engine Signal 6) at a mechanic can vary depending on the specific cause of the issue, but it may range from $100 to $500 or more, including parts and labor.
9. Can a DIY enthusiast with basic automotive knowledge fix OBDII code C1136 Nissan (Engine Signal 6)?
A DIY enthusiast with basic automotive knowledge may be able to fix OBDII code C1136 Nissan (Engine Signal 6 by following repair guides, replacing components like ignition coils or spark plugs, and using an OBDII scanner to clear the trouble codes.
10. How often does OBDII code C1136 Nissan (Engine Signal 6) occur in Nissan vehicles?
OBDII code C1136 Nissan (Engine Signal 6) is relatively uncommon but can occur in Nissan vehicles due to various factors like wear and tear on ignition components, electrical issues, or ECM malfunctions.
Discuss the causes and fixes for C1136 Nissan OBDII Code
Code C1136 Nissan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
