C112A Code - Incorrect Electric Parking Brake Motor Gear Unit Position
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Electric Parking Brake Motor Gear Unit Position. Common causes include Faulty Electric Parking Brake Motor, Electric Parking Brake Motor harness is open or shorted, Electric Parking Brake Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C112A indicates Incorrect Electric Parking Brake Motor Gear Unit Position.
- Common causes
- Common causes include Faulty Electric Parking Brake Motor, Electric Parking Brake Motor harness is open or shorted, Electric Parking Brake Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C112A Description
What are the Possible Causes of the DTC C112A?
- Faulty Electric Parking Brake Motor
- Electric Parking Brake Motor harness is open or shorted
- Electric Parking Brake Motor circuit poor electrical connection
How to Fix the DTC C112A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C112A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C112A code?
Need more information on how to fix the C112A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C112A code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- C112A Mazda — Incorrect Electric Parking Brake Motor Gear Unit Position
Frequently Asked Questions about C112A Code
1. What are common symptoms of OBDII code C112A, Incorrect Electric Parking Brake Motor Gear Unit Position?
- Common symptoms include the electric parking brake not functioning properly, unusual noises from the motor, and warning lights on the dashboard.
2. What could cause OBDII code C112A to trigger?
- The code may be triggered by a faulty electric parking brake motor gear unit, damaged gear position sensor, or issues with the electronic brake control module.
3. How can I diagnose the root cause of OBDII code C112A?
- Diagnosis typically involves inspecting the electric parking brake system for physical damage, checking the gear position sensor for proper operation, and using a diagnostic scan tool to read fault codes.
4. Can I continue driving with OBDII code C112A present?
- It is not recommended to continue driving with this code active, as it may affect the functionality of the electric parking brake system and compromise vehicle safety.
5. What are the repair options for OBDII code C112A?
- Repair options may include replacing the electric parking brake motor gear unit, repairing or replacing the gear position sensor, or reprogramming the electronic brake control module.
6. Is it possible to reset OBDII code C112A without repairs?
- While clearing the fault code may temporarily turn off the warning light, it is crucial to address the underlying issue to prevent further problems with the electric parking brake system.
7. How much does it typically cost to repair OBDII code C112A?
- Repair costs can vary depending on the specific cause of the issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can OBDII code C112A be intermittent?
- Yes, the code may appear intermittently if the issue with the electric parking brake motor gear unit position is sporadic or related to certain driving conditions.
9. Are there any preventive maintenance tips to avoid OBDII code C112A?
- Regularly inspecting and maintaining the electric parking brake system, including checking for abnormal sounds or malfunctions, can help prevent issues that trigger this fault code.
10. Will OBDII code C112A cause my vehicle to fail an emissions test?
- While the code itself is related to the electric parking brake system rather than emissions, it is essential to resolve all fault codes before an emissions test to ensure overall vehicle health and compliance.
Discuss the causes and fixes for C112A OBDII Code
Code C112A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
