C1116 Nissan Code - Stop Lamp Switch
Quick Answer
The stop lamp switch transmits the stop lamp switch signal (ON/OFF) to the ABS actuator and electric unit (control unit). Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- C1116 Nissan indicates Stop Lamp Switch.
- Common causes
- Common causes include Faulty Stop Lamp Switch, Stop Lamp Switch harness is open or shorted, Stop Lamp Switch circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code C1116 Nissan Description
What are the Possible Causes of the DTC C1116 Nissan?
- Faulty Stop Lamp Switch
- Stop Lamp Switch harness is open or shorted
- Stop Lamp Switch circuit poor electrical connection
- Faulty ABS Actuator and Electric Unit
How to Fix the DTC C1116 Nissan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1116 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1116 Nissan code?
Need more information on how to fix the C1116 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1116 Nissan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1116 Nissan Code
1. What are the common symptoms of OBDII code C1116 Nissan related to the Stop Lamp Switch?
Common symptoms include the brake lights staying on constantly, the brake lights not coming on when the brake pedal is pressed, and the inability to shift out of park.
2. What are the possible causes of OBDII code C1116 Nissan indicating an issue with the Stop Lamp Switch?
Potential causes include a faulty stop lamp switch, a misadjusted stop lamp switch, damaged wiring or connectors related to the switch, or a problem with the brake pedal position sensor.
3. How can I diagnose a problem with the Stop Lamp Switch causing OBDII code C1116 Nissan?
You can start by checking the stop lamp switch for proper operation, inspecting the wiring and connectors for any damage, and verifying the adjustment of the switch according to manufacturer specifications.
4. Can a malfunctioning Stop Lamp Switch lead to other issues in the vehicle?
Yes, a faulty stop lamp switch can cause safety concerns by affecting the operation of the brake lights, potentially leading to rear-end collisions due to the lack of proper brake light indication to other drivers.
5. Is it safe to drive with OBDII code C1116 Nissan triggered by a problem with the Stop Lamp Switch?
It is not recommended to drive with this code active, as it may compromise your safety on the road due to the brake lights not functioning correctly. It is advisable to address the issue promptly.
6. How can I repair a faulty Stop Lamp Switch triggering OBDII code C1116 Nissan?
Repairing the issue may involve replacing the stop lamp switch, adjusting the switch properly, repairing or replacing damaged wiring or connectors, or addressing any issues with the brake pedal position sensor.
7. Are there any preventive maintenance tips to avoid encountering OBDII code C1116 Nissan related to the Stop Lamp Switch?
Regularly inspecting the brake lights' operation, ensuring the stop lamp switch is adjusted correctly, and addressing any brake pedal sensor issues promptly can help prevent this code from appearing.
8. Can a DIY enthusiast replace the Stop Lamp Switch to resolve OBDII code C1116 Nissan?
Yes, replacing the stop lamp switch can be a DIY task for those with some mechanical knowledge and the right tools. However, if unsure, it's recommended to seek professional assistance.
9. Will resetting the OBDII system clear OBDII code C1116 Nissan caused by the Stop Lamp Switch issue?
Resetting the system may temporarily clear the code, but if the underlying problem with the stop lamp switch is not addressed, the code is likely to reappear upon driving and the system detecting the issue again.
10. How crucial is the Stop Lamp Switch in the overall safety and functionality of the vehicle?
The stop lamp switch is a critical component for safety, as it ensures the brake lights illuminate when the brake pedal is pressed, signaling to other drivers that you are slowing down or stopping. Ensuring its proper operation is essential for road safety.
Discuss the causes and fixes for C1116 Nissan OBDII Code
Code C1116 Nissan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
