AutoCodes – Hyundai – C1112 Hyundai

C1112 Hyundai Code - Sensor Source Voltage

Quick Answer

A torque sensor, installed in the middle of steering column, is one unit composed of a main sensor and sub sensor. Common causes include Faulty Torque Sensor, Torque Sensor harness is open or shorted, Torque Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1112 Hyundai indicates Sensor Source Voltage.
Common causes: Common causes include Faulty Torque Sensor, Torque Sensor harness is open or shorted, Torque Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 14,816

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1112 Hyundai Description

A torque sensor, installed in the middle of steering column, is one unit composed of a main sensor and sub sensor. When the steering wheel is turned, the torsion bar is twisted in proportion to load of the wheel, and the assembled shaft turns as well. At this moment, due to twist of shaft, a change in the magnetic field is generated in main sensor coil surrounds the shaft and in the sub-sensor coil which is inside torque sensor. The change in current produced by this process is input to the EPS CM. With a change of input sensor signal current, EPS CM determines driver's steering direction then, comparing current differences between the two sensors, the EPS CM determines whether main sensor is open/short. The Torque sensor can be damaged during disassembly of the sensor. You must disassemble or remove the sensor when removing or replacing the assembly.

OBDII Code C1112 Hyundai - Sensor Source Voltage - AutoCodes.com — C1112 Hyundai Code - Sensor Source Voltage

What does this mean?

What are the Possible Causes of the DTC C1112 Hyundai?

Faulty Torque Sensor
Torque Sensor harness is open or shorted
Torque Sensor circuit poor electrical connection

How to Fix the DTC C1112 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1112 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1112 Hyundai code?

Need more information on how to fix the C1112 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1112 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1112 Hyundai Code

What does the OBDII code C1112 signify in a Hyundai vehicle?

The OBDII code C1112 indicates a problem with the sensor source voltage, which typically affects the operation of various vehicle sensors.

What symptoms might indicate a C1112 code is present?

Common symptoms include warning lights on the dashboard, erratic gauge readings, or issues with the vehicle's performance, such as poor acceleration or stalling.

What could cause the C1112 code to trigger?

Causes may include a faulty sensor, a wiring issue (such as short circuits or open circuits), poor electrical connections, or a malfunctioning control module.

How can I diagnose a C1112 code?

To diagnose the C1112 code, check the vehicle's wiring and connectors for damage, use a multimeter to test voltage at the sensor, and inspect the sensor itself for faults.

What are some common repairs for a C1112 code?

Common repairs include replacing the faulty sensor, repairing or replacing damaged wiring or connectors, and reprogramming or replacing the control module if necessary.

Can I drive my Hyundai with a C1112 code?

While it may be possible to drive the vehicle, it is not recommended, as it can lead to further damage or reduced performance. It's best to address the issue promptly.

How much might it cost to fix a C1112 code?

Repair costs can vary widely depending on the underlying issue but may range from $100 to $500 or more, depending on whether a sensor replacement or wiring repair is needed.

Will clearing the C1112 code fix the problem?

Clearing the code may temporarily turn off the warning light, but if the underlying issue is not resolved, the code is likely to return.

What should I do if I keep getting the C1112 code?

If the C1112 code keeps returning, itâ€™s advisable to seek help from a professional mechanic who can perform a thorough diagnosis and repair the root cause of the issue.