AutoCodes – Ford – C110E Ford

C110E Ford Code - Left Rear Damper Solenoid

Quick Answer

The Vehicle Dynamics Module (VDM) sends a variable voltage to the damper solenoids based on sensor input and HS-CAN messages. Common causes include Faulty Left Rear Damper Solenoid, Left Rear Damper Solenoid harness is open or shorted, Left Rear Damper Solenoid circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C110E Ford indicates Left Rear Damper Solenoid.
Common causes
Common causes include Faulty Left Rear Damper Solenoid, Left Rear Damper Solenoid harness is open or shorted, Left Rear Damper Solenoid circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 4,605
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C110E Ford Description

The Vehicle Dynamics Module (VDM) sends a variable voltage to the damper solenoids based on sensor input and HS-CAN messages. The VDM continually monitors the damper solenoid circuits and sets a DTC when a circuit fault is detected. A shorted or open damper solenoid also causes the VDM to set a DTC.
OBDII Code C110E Ford - Left Rear Damper Solenoid - AutoCodes.com
C110E Ford Code - Left Rear Damper Solenoid

What are the Possible Causes of the DTC C110E Ford?

  • Faulty Left Rear Damper Solenoid
  • Left Rear Damper Solenoid harness is open or shorted
  • Left Rear Damper Solenoid circuit poor electrical connection

How to Fix the DTC C110E Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C110E Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C110E Ford code?

Need more information on how to fix the C110E Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C110E Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C110E Ford Code

1. What does the OBDII code C110E mean on a Ford vehicle?

C110E indicates an issue with the left rear damper solenoid, which is part of the vehicle's adaptive suspension system.

2. What are the common symptoms of the C110E code on a Ford?

Symptoms may include a rough ride, uneven suspension height, a suspension warning light on the dashboard, or noticeable handling issues.

3. What causes the C110E code to appear?

Common causes include a faulty left rear damper solenoid, damaged wiring or connectors, or a malfunction in the suspension control module.

4. Can I continue driving with the C110E code?

While the vehicle may still be drivable, ignoring the issue can lead to reduced ride quality and potentially cause further damage to the suspension system.

5. How do I diagnose the C110E code?

Start by inspecting the wiring and connectors for damage, testing the left rear damper solenoid for proper operation, and scanning the suspension control module for additional codes.

6. How do I fix the C110E code on my Ford?

Repairs may include replacing the left rear damper solenoid, repairing damaged wiring, or reprogramming the suspension control module if needed.

7. How much does it cost to fix the C110E code?

Repair costs can vary but typically range from $200 to $600, depending on whether the solenoid needs replacing and labor costs in your area.

8. Can a suspension control module failure cause the C110E code?

Yes, a malfunctioning suspension control module can fail to communicate with the damper solenoid, triggering the code.

9. Does the C110E code affect all Ford vehicles?

No, it is specific to Ford models equipped with an adaptive suspension system and may not apply to all Ford vehicles.

10. Can I reset the C110E code without fixing the problem?

Resetting the code without addressing the underlying issue may temporarily clear the warning, but the code will likely return, and the problem will persist.

Discuss the causes and fixes for C110E Ford OBDII Code

Code C110E Ford comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play