C1101 GMC - Brake Booster Vacuum Sensor Performance

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

C1101 GMC Possible Causes

  • Faulty Brake Booster Vacuum Sensor
  • Brake Booster Vacuum Sensor harness is open or shorted
  • Brake Booster Vacuum Sensor circuit poor electrical connection

First diagnose C1101 GMC code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the C1101 GMC code

    Labor: 1.0

    The cost of diagnosing the C1101 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

C1101 GMC Possible Symptoms

  • Anti-Lock Brake System (ABS) Warning Light ON
  • Engine Light ON (or Service Engine Soon Warning Light)

C1101 Gmc Description

The Electronic Brake Control Module (EBCM) provides a power 5-volt reference to the brake booster vacuum sensor. The brake booster vacuum sensor converts the change in vacuum levels in the brake booster into a voltage signal. This signal is sent to the EBCM. The voltage signal ranges, from 0.13 to 3.30 volts depending on vacuum levels. The low reference is the return side of the sensor to ground.
OBDII Code C1101 Gmc - Brake Booster Vacuum Sensor Performance - AutoCodes.com

C1101 GMC More Information

Need more information on how to fix the C1101 GMC code?
Get Access to Factory Service Manuals

Need more help?

Get the C1101 Gmc code diagnosed by a professional: Find a repair shop in your area

Related Information

C1101 GMC Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C1101 Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧