AutoCodes – Chevrolet – C1101 Chevrolet

C1101 Chevrolet Code - Brake Booster Vacuum Sensor Performance

Quick Answer

The Electronic Brake Control Module (EBCM) provides a power 5-volt reference to the brake booster vacuum sensor. Common causes include Faulty Brake Booster Vacuum Sensor, Brake Booster Vacuum Sensor harness is open or shorted, Brake Booster Vacuum Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1101 Chevrolet indicates Brake Booster Vacuum Sensor Performance.
Common causes
Common causes include Faulty Brake Booster Vacuum Sensor, Brake Booster Vacuum Sensor harness is open or shorted, Brake Booster Vacuum Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,286
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 13, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C1101 Chevrolet Description

The Electronic Brake Control Module (EBCM) provides a power 5-volt reference to the brake booster vacuum sensor. The brake booster vacuum sensor converts the change in vacuum levels in the brake booster into a voltage signal. This signal is sent to the EBCM. The voltage signal ranges, from 0.13 to 3.30 volts depending on vacuum levels. The low reference is the return side of the sensor to ground.
OBDII Code C1101 Chevrolet - Brake Booster Vacuum Sensor Performance - AutoCodes.com
C1101 Chevrolet Code - Brake Booster Vacuum Sensor Performance

What are the Possible Causes of the DTC C1101 Chevrolet?

  • Faulty Brake Booster Vacuum Sensor
  • Brake Booster Vacuum Sensor harness is open or shorted
  • Brake Booster Vacuum Sensor circuit poor electrical connection

How to Fix the DTC C1101 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1101 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1101 Chevrolet code?

Need more information on how to fix the C1101 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1101 Chevrolet code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1101 Chevrolet Code

1. What does the OBDII code C1101 mean on a Chevrolet?

C1101 indicates a problem with the brake booster vacuum sensor's performance, which monitors the vacuum level in the brake booster.

2. What are the common symptoms of code C1101 in a Chevrolet?

Common symptoms include a hard brake pedal, reduced braking efficiency, illuminated ABS or brake warning lights, and abnormal braking behavior.

3. What causes the C1101 code to appear in a Chevrolet?

The code can be caused by a faulty brake booster vacuum sensor, a vacuum leak, damaged wiring or connectors, or a malfunctioning brake booster.

4. Can I drive my Chevrolet with a C1101 code?

Driving with this code is not recommended, as it may impair braking performance and increase the risk of an accident.

5. How do I diagnose the C1101 code on a Chevrolet?

Start by inspecting the vacuum sensor, wiring, and connectors for damage. Use a scan tool to check sensor data and perform a vacuum test on the brake booster.

6. How do I fix the C1101 code on my Chevrolet?

Repairs may include replacing the brake booster vacuum sensor, repairing vacuum leaks, fixing damaged wiring, or replacing the brake booster if necessary.

7. How much does it cost to fix the C1101 code on a Chevrolet?

The repair cost varies depending on the issue, ranging from $50 to $300 for a sensor replacement or more if the brake booster needs replacement.

8. Can a vacuum leak trigger the C1101 code?

Yes, a vacuum leak can cause insufficient vacuum levels in the brake booster, triggering the C1101 code.

9. Is the C1101 code related to the ABS system?

While not directly related to the ABS system, the C1101 code can activate ABS or brake warning lights due to its impact on braking performance.

10. How can I prevent the C1101 code from recurring on my Chevrolet?

Regularly inspect and maintain the brake system, check for vacuum leaks, and ensure all sensors and wiring are in good condition.

Discuss the causes and fixes for C1101 Chevrolet OBDII Code

Code C1101 Chevrolet comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play