C1086 Jeep Code - ABS System Control Too Long Over Temperature
Quick Answer
When the Anti-lock Brake System (ABS) Module calculated thermal model has determined that there has been excessive system activation. Common causes include Faulty Anti-lock Brake System (ABS) Module, Anti-lock Brake System (ABS) Module harness is open or shorted, Anti-lock Brake System (ABS) Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1086 Jeep indicates ABS System Control Too Long Over Temperature.
- Common causes
- Common causes include Faulty Anti-lock Brake System (ABS) Module, Anti-lock Brake System (ABS) Module harness is open or shorted, Anti-lock Brake System (ABS) Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1086 Jeep Description
What are the Possible Causes of the DTC C1086 Jeep?
- Faulty Anti-lock Brake System (ABS) Module
- Anti-lock Brake System (ABS) Module harness is open or shorted
- Anti-lock Brake System (ABS) Module circuit poor electrical connection
How to Fix the DTC C1086 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1086 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1086 Jeep code?
Need more information on how to fix the C1086 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1086 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1086 Jeep Code
1. What does the OBDII code C1086 mean on a Jeep?
Code C1086 indicates an issue with the ABS system where the control module has detected an over-temperature condition or excessive operation time.
2. What are the common symptoms of the C1086 code on a Jeep?
Symptoms may include the ABS warning light illuminated, the traction control system disabled, reduced braking performance, or a loss of ABS functionality.
3. What causes the C1086 ABS System Control Too Long Over Temperature code?
Common causes include a faulty ABS control module, overheating due to excessive braking, wiring issues, or a malfunctioning wheel speed sensor.
4. Can I still drive my Jeep with the C1086 code?
While the vehicle may still be drivable, the ABS system and traction control may not function properly, which can compromise safety in certain driving conditions.
5. How do I diagnose the C1086 code on my Jeep?
Start by scanning for codes with an OBDII scanner, inspecting the ABS control module and wiring, and checking for overheating or damaged components in the ABS system.
6. What repairs are needed to fix the C1086 code?
Repairs may include replacing the ABS control module, repairing or replacing damaged wiring, or addressing overheating issues by inspecting the braking system.
7. Can a faulty wheel speed sensor cause the C1086 code?
Yes, a faulty wheel speed sensor can send incorrect data to the ABS module, potentially triggering this code.
8. How much does it cost to repair the C1086 code on a Jeep?
Repair costs vary depending on the issue, but replacing an ABS control module typically costs between $300 and $800, excluding labor.
9. What preventive maintenance can help avoid the C1086 code?
Regularly inspect the ABS components, ensure proper brake fluid levels, and avoid excessive braking that could overheat the system.
10. What tools are needed to troubleshoot the C1086 code?
You’ll need an OBDII scanner, a multimeter to check wiring and connections, and possibly a thermal sensor to detect overheating components.
Discuss the causes and fixes for C1086 Jeep OBDII Code
Code C1086 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
