C107B Jeep Code - Wheel Speed Comparative Performance Signal Compare Failure
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Wheel Speed Sensor (WSS). Common causes include Faulty Wheel Speed Sensor (WSS), Wheel Speed Sensor (WSS) harness is open or shorted, Wheel Speed Sensor (WSS) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C107B Jeep indicates Wheel Speed Comparative Performance Signal Compare Failure.
- Common causes
- Common causes include Faulty Wheel Speed Sensor (WSS), Wheel Speed Sensor (WSS) harness is open or shorted, Wheel Speed Sensor (WSS) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C107B Jeep Description
What are the Possible Causes of the DTC C107B Jeep?
- Faulty Wheel Speed Sensor (WSS)
- Wheel Speed Sensor (WSS) harness is open or shorted
- Wheel Speed Sensor (WSS) circuit poor electrical connection
- Faulty Anti-Lock Brake System (ABS) Module
How to Fix the DTC C107B Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C107B Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C107B Jeep code?
Need more information on how to fix the C107B Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C107B Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C107B Jeep Code
1. What are the common symptoms of OBDII code C107B in a Jeep?
- Common symptoms include ABS or traction control system warning lights illuminating on the dashboard, erratic speedometer readings, and potential loss of traction control functionality.
2. What does the OBDII code C107B for a Jeep indicate?
- The code C107B indicates a Wheel Speed Comparative Performance Signal Compare Failure, usually related to issues with the wheel speed sensors or the ABS system.
3. What are the possible causes of OBDII code C107B in a Jeep?
- Possible causes include faulty wheel speed sensors, damaged wiring or connectors, ABS module issues, wheel bearing problems, or sensor alignment issues.
4. How can I diagnose the OBDII code C107B in my Jeep?
- Diagnosing the code usually involves using a diagnostic scanner to read the code, inspecting the wheel speed sensors and their connections, checking for damaged wiring, and performing a visual inspection of the ABS system components.
5. How can I repair OBDII code C107B in my Jeep?
- Repair methods may include replacing faulty wheel speed sensors, repairing damaged wiring, cleaning sensor connections, resetting the ABS system, or recalibrating the wheel speed sensors.
6. Can driving with the OBDII code C107B present cause any further damage to my Jeep?
- Continuing to drive with the code present may result in decreased ABS system functionality, potential safety hazards in slippery conditions, and further damage to the ABS components.
7. How urgent is it to address the OBDII code C107B in my Jeep?
- It is recommended to address the code as soon as possible to ensure the proper functioning of the ABS system and maintain safe driving conditions.
8. Are there any DIY tips for troubleshooting OBDII code C107B in a Jeep?
- DIY tips may include visually inspecting the wheel speed sensors and their connections, checking for damaged wiring, and ensuring proper sensor alignment before seeking professional help if needed.
9. Can a simple reset of the OBDII system clear the code C107B in a Jeep?
- A simple reset may temporarily clear the code, but if the underlying issue causing the code is not addressed, it is likely to reappear.
10. How much does it typically cost to repair OBDII code C107B in a Jeep?
- Repair costs can vary depending on the exact cause of the issue, but they may range from a few hundred dollars for sensor replacement to more significant costs if the ABS module needs to be repaired or replaced.
Discuss the causes and fixes for C107B Jeep OBDII Code
Code C107B Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
