AutoCodesMitsubishi – C1057 Mitsubishi

C1057 Mitsubishi Code - Abnormality In Rear Right Wheel Inlet Valve System

Quick Answer

The Anti-Lock Brake System (ABS) Electronic Control Unit (ECU) the power supply circuit for the solenoid valve. Common causes include Faulty Anti-Lock Brake System (ABS) Electronic Control Unit (ECU), ABS-ECU harness is open or shorted, ABS-ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C1057 Mitsubishi indicates Abnormality In Rear Right Wheel Inlet Valve System.
Common causes
Common causes include Faulty Anti-Lock Brake System (ABS) Electronic Control Unit (ECU), ABS-ECU harness is open or shorted, ABS-ECU circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,330
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 09, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1057 Mitsubishi Description

The Anti-Lock Brake System (ABS) Electronic Control Unit (ECU) the power supply circuit for the solenoid valve. The solenoid valve is energized by the valve relay, which is incorporated in ABS-ECU. The valve relay, which is incorporated in ABS-ECU, is always energizing the solenoid valve unless the initial check is in progress when the ignition switch is turned on, or the recurrent system check is in progress. ABS-ECU activates the solenoid valve by turning on its driving transistor.
OBDII Code C1057 Mitsubishi - Abnormality In Rear Right Wheel Inlet Valve System - AutoCodes.com
C1057 Mitsubishi Code - Abnormality In Rear Right Wheel Inlet Valve System

What are the Possible Causes of the DTC C1057 Mitsubishi?

  • Faulty Anti-Lock Brake System (ABS) Electronic Control Unit (ECU)
  • ABS-ECU harness is open or shorted
  • ABS-ECU circuit poor electrical connection

How to Fix the DTC C1057 Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1057 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1057 Mitsubishi code?

Need more information on how to fix the C1057 Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1057 Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1057 Mitsubishi Code

1. What does OBDII code C1057 mean on a Mitsubishi?

C1057 indicates an abnormality in the rear right wheel inlet valve system, typically related to the ABS or traction control system.

2. What are the common symptoms of C1057 on a Mitsubishi?

Symptoms may include the ABS or traction control warning light illuminating, reduced braking efficiency, or unusual braking behavior.

3. What causes the C1057 code to appear?

Common causes include a faulty ABS module, a malfunctioning rear right wheel inlet valve, damaged wiring or connectors, or corrosion in the ABS system.

4. Is it safe to drive with the C1057 code active?

Driving with this code may reduce braking performance or disable ABS functionality, potentially compromising safety. It’s best to address the issue promptly.

5. How can I diagnose the C1057 code on my Mitsubishi?

Start by using an OBDII scanner to confirm the code, then inspect the wiring, connectors, and rear right wheel inlet valve for damage or corrosion. You may also need to test the ABS module.

6. Can a faulty wheel speed sensor cause the C1057 code?

While a wheel speed sensor issue is related to ABS, this code specifically points to a problem with the rear right wheel inlet valve system, not the sensor.

7. How do I fix the C1057 code on my Mitsubishi?

Repairs may include replacing the rear right wheel inlet valve, cleaning or repairing corroded electrical connections, or replacing the ABS module if faulty.

8. What tools are needed to fix the C1057 code?

You’ll need an OBDII scanner, a multimeter for electrical testing, and possibly basic tools to access and replace components like the inlet valve.

9. How much does it cost to repair the C1057 code?

Repair costs vary depending on the issue, ranging from $100 for wiring repairs to $1,000 or more for ABS module replacement.

10. Can clearing the C1057 code with a scanner fix the issue?

Clearing the code without addressing the underlying problem will not fix the issue, and the code is likely to return. Proper diagnosis and repair are necessary.

Discuss the causes and fixes for C1057 Mitsubishi OBDII Code

Code C1057 Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play