C1047 Jeep Code - Right Front Wheel Pressure Phase Monitoring
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Right Front Wheel Pressure Phase. Common causes include Dirty Right Front Tone Wheel, Dirty Right Front Wheel Speed Sensor (WSS), Faulty Right Front Wheel Speed Sensor (WSS). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1047 Jeep indicates Right Front Wheel Pressure Phase Monitoring.
- Common causes
- Common causes include Dirty Right Front Tone Wheel, Dirty Right Front Wheel Speed Sensor (WSS), Faulty Right Front Wheel Speed Sensor (WSS).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1047 Jeep Description
What are the Possible Causes of the DTC C1047 Jeep?
- Dirty Right Front Tone Wheel
- Dirty Right Front Wheel Speed Sensor (WSS)
- Faulty Right Front Wheel Speed Sensor (WSS)
- Right Front Wheel Speed Sensor (WSS) harness is open or shorted
- Right Front Wheel Speed Sensor (WSS) circuit poor electrical connection
- Damage Right Front Tone Wheel
- Faulty Anti-Lock Brake System (ABS) Module
How to Fix the DTC C1047 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1047 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1047 Jeep code?
Need more information on how to fix the C1047 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1047 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1047 Jeep Code
1. What are the common symptoms of OBDII code C1047 in a Jeep related to Right Front Wheel Pressure Phase Monitoring?
The common symptoms include the TPMS (Tire Pressure Monitoring System) warning light illuminating on the dashboard and potential issues with monitoring the pressure in the right front wheel.
2. What could cause the OBDII code C1047 in a Jeep for Right Front Wheel Pressure Phase Monitoring?
Possible causes of this code include a faulty tire pressure sensor, damaged wiring or connectors in the TPMS system, low tire pressure, or sensor calibration issues.
3. How can I diagnose the OBDII code C1047 for the Right Front Wheel Pressure Phase Monitoring in my Jeep?
Diagnosing this code typically involves using a diagnostic scanner to read the specific error code, checking the tire pressure in the right front wheel, inspecting the TPMS sensor and wiring for any visible damage, and performing a sensor calibration if needed.
4. Can low tire pressure trigger the OBDII code C1047 in a Jeep for Right Front Wheel Pressure Phase Monitoring?
Yes, low tire pressure in the right front wheel can trigger this code as the TPMS system may not be able to accurately monitor the pressure, leading to a fault code being generated.
5. What are the repair options for fixing the OBDII code C1047 related to Right Front Wheel Pressure Phase Monitoring in a Jeep?
Repair options may include replacing a faulty tire pressure sensor, repairing damaged wiring or connectors, inflating the right front tire to the correct pressure, and recalibrating the TPMS system.
6. Is it safe to continue driving my Jeep with the OBDII code C1047 for Right Front Wheel Pressure Phase Monitoring?
It is generally safe to drive with this code, but it is recommended to address the issue promptly to ensure the proper functioning of the TPMS system and accurate tire pressure monitoring.
7. Can I reset the OBDII code C1047 for Right Front Wheel Pressure Phase Monitoring in my Jeep without fixing the underlying issue?
While you can clear the code with a diagnostic scanner, it is not recommended to reset it without addressing the root cause, as the issue may persist and trigger the code again.
8. How often should I check the tire pressure in my Jeep to prevent triggering the OBDII code C1047 for Right Front Wheel Pressure Phase Monitoring?
It is recommended to check the tire pressure regularly, at least once a month, to ensure proper inflation and functioning of the TPMS system, which can help prevent triggering this code.
9. Can extreme temperatures affect the triggering of OBDII code C1047 in a Jeep related to Right Front Wheel Pressure Phase Monitoring?
Yes, extreme temperature changes can impact tire pressure, potentially triggering this code. Monitoring tire pressure and adjusting it as needed during temperature fluctuations can help prevent false alarms.
10. Does the OBDII code C1047 for Right Front Wheel Pressure Phase Monitoring indicate a serious issue in my Jeep?
While this code is related to the TPMS system, it does not necessarily indicate a serious mechanical problem. However, it should be addressed to ensure proper tire pressure monitoring and overall vehicle safety.
Discuss the causes and fixes for C1047 Jeep OBDII Code
Code C1047 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
