AutoCodes – Jeep – C1035 Jeep

C1035 Jeep Code - Right Rear Wheel Speed Comparative Performance

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the Right Rear Wheel Speed Sensor. Common causes include Tire air pressure mismatch, Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C1035 Jeep indicates Right Rear Wheel Speed Comparative Performance.
Common causes: Common causes include Tire air pressure mismatch, Faulty Right Rear Wheel Speed Sensor, Right Rear Wheel Speed Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,967

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 04, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C1035 Jeep Description

The Anti-Lock Brake System (ABS) Module monitors the Right Rear Wheel Speed Sensor. The ABS Module sets the OBDII code when the Right Rear Wheel Speed Sensor (WSS) Signal reading is different from the readings received from the other WSS's at a vehicle speed above 40 km/h (25 mph). The Anti-Lock Brake Module compares WSS readings from side-to-side on an axle and front-to-rear.

OBDII Code C1035 Jeep - Right Rear Wheel Speed Comparative Performance - AutoCodes.com — C1035 Jeep Code - Right Rear Wheel Speed Comparative Performance

What does this mean?

What are the Possible Causes of the DTC C1035 Jeep?

Tire air pressure mismatch
Faulty Right Rear Wheel Speed Sensor
Right Rear Wheel Speed Sensor harness is open or shorted
Right Rear Wheel Speed Sensor circuit poor electrical connection
Faulty Anti-Lock Brake System (ABS) Module

How to Fix the DTC C1035 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C1035 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C1035 Jeep code?

Need more information on how to fix the C1035 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C1035 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C1035 Jeep Code

What does the OBDII code C1035 indicate in a Jeep?

C1035 indicates a Right Rear Wheel Speed Comparative Performance issue, meaning the wheel speed sensor's signal for the right rear wheel is not matching expected performance.

What are common symptoms associated with the C1035 code?

Common symptoms may include the ABS warning light illuminating, traction control issues, abnormal braking behavior, or the vehicle not responding correctly to acceleration or deceleration.

What could cause the C1035 code to trigger?

Potential causes include a faulty right rear wheel speed sensor, damaged wiring or connectors, issues with the ABS module, or a malfunctioning brake system component.

How can I diagnose the C1035 code?

Start by visually inspecting the right rear wheel speed sensor and its wiring for damage. Use a multimeter to test the sensor's resistance and check for proper voltage signals while the vehicle is in motion.

What repairs are typically needed to fix the C1035 code?

Repairs may involve replacing the right rear wheel speed sensor, repairing any damaged wiring or connectors, or addressing issues with the ABS module or brake components.

Can I drive my Jeep with the C1035 code?

It is not recommended to drive the vehicle with this code, as it may affect braking performance and traction control, leading to unsafe driving conditions.

How much does it typically cost to fix a C1035 code?

Repair costs can vary widely depending on the cause; replacing a wheel speed sensor might range from $100 to $300, while more extensive repairs could be higher.

Is it safe to ignore the C1035 code?

Ignoring the C1035 code is not safe, as it can lead to compromised braking performance and increased risk of accidents due to loss of ABS and traction control functions.

Will a wheel speed sensor replacement fix the C1035 code?

If the right rear wheel speed sensor is indeed the faulty component, replacing it should resolve the C1035 code; however, it's important to diagnose the issue accurately to avoid unnecessary repairs.