C1020 Ford Code - Brake System Fill Not Complete: No Sub-Type Information
Quick Answer
The C1020 code is pre-set in a new Anti-Lock Brake System (ABS) Module and Hydraulic Control Unit (HCU) Assembly and can only be cleared when the Brake System Service Bleed is successfully carried out and the Regenerative Brake System Calibration routine completes successfully. Common causes include Brake System Service Bleed. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1020 Ford indicates Brake System Fill Not Complete: No Sub-Type Information.
- Common causes
- Common causes include Brake System Service Bleed.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1020 Ford Description
How to Fix the DTC C1020 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1020 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1020 Ford code?
Need more information on how to fix the C1020 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1020 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1020 Ford Code
1. What are the common symptoms of OBDII code C1020 in a Ford related to the brake system fill not being complete?
- The common symptoms include the brake warning light illuminating on the dashboard and potential issues with brake performance.
2. What are the possible causes of OBDII code C1020 in a Ford indicating that the brake system fill is not complete?
- The code may be triggered by low brake fluid levels, air in the brake system, a leaking brake system, or a malfunctioning brake module.
3. How can I diagnose the OBDII code C1020 in a Ford related to incomplete brake system filling?
- Performing a visual inspection of the brake fluid level, checking for leaks in the brake system, and using a diagnostic scanner to read the trouble codes can help diagnose the issue.
4. Can driving with the OBDII code C1020 in a Ford indicating incomplete brake system filling be dangerous?
- Driving with this code can be dangerous as it may lead to reduced brake performance or failure, increasing the risk of accidents.
5. What are some repair tips for fixing OBDII code C1020 in a Ford with the message "Brake System Fill Not Complete: No Sub-Type Information"?
- Start by checking and topping up the brake fluid levels, bleeding the brake system to remove air, inspecting for leaks, and repairing or replacing any faulty brake components.
6. Is it possible to reset the OBDII code C1020 in a Ford indicating a problem with the brake system fill not being complete?
- Yes, after addressing the root cause of the issue, you can reset the trouble codes using a diagnostic scanner or by disconnecting the car's battery for a few minutes.
7. How serious is OBDII code C1020 in a Ford if it shows that the brake system fill is not complete?
- This code should be taken seriously as it indicates potential issues with the brake system that can compromise your vehicle's safety and performance.
8. Can I continue driving my Ford with the OBDII code C1020 related to incomplete brake system filling?
- It is not recommended to continue driving the vehicle with this code as it could lead to unsafe braking conditions. It's advisable to address the issue promptly.
9. How much does it typically cost to repair OBDII code C1020 in a Ford signaling incomplete brake system filling?
- The cost of repair can vary depending on the specific cause of the issue. It may range from a simple brake fluid top-up to more extensive repairs like fixing leaks or replacing components.
10. Are there any specific Ford models known to be more prone to triggering OBDII code C1020 related to incomplete brake system filling?
- While this code can occur in various Ford models, some older vehicles or those with high mileage may be more susceptible due to wear and tear on the brake system components.
Discuss the causes and fixes for C1020 Ford OBDII Code
Code C1020 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
