AutoCodes – Mitsubishi – C101C Mitsubishi

C101C Mitsubishi Code - Front Right Wheel Speed Sensor System

Quick Answer

The Anti-Lock Brake System (ABS) Module monitors the Front Right Wheel Speed Sensor. Common causes include Faulty Front Right Wheel Speed Sensor, Front Right Wheel Speed Sensor harness is open or shorted, Front Right Wheel Speed Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
C101C Mitsubishi indicates Front Right Wheel Speed Sensor System.
Common causes
Common causes include Faulty Front Right Wheel Speed Sensor, Front Right Wheel Speed Sensor harness is open or shorted, Front Right Wheel Speed Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 6,109
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 05, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code C101C Mitsubishi Description

The Anti-Lock Brake System (ABS) Module monitors the Front Right Wheel Speed Sensor. The ABS Module sets the OBDII code when an irregular change in the Front Right Wheel Speed Sensor is detected, the diagnostic trouble code of the relevant wheel speed sensor is set.
OBDII Code C101C Mitsubishi - Front Right Wheel Speed Sensor System - AutoCodes.com
C101C Mitsubishi Code - Front Right Wheel Speed Sensor System

What are the Possible Causes of the DTC C101C Mitsubishi?

  • Faulty Front Right Wheel Speed Sensor
  • Front Right Wheel Speed Sensor harness is open or shorted
  • Front Right Wheel Speed Sensor circuit poor electrical connection

How to Fix the DTC C101C Mitsubishi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C101C Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C101C Mitsubishi code?

Need more information on how to fix the C101C Mitsubishi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C101C Mitsubishi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C101C Mitsubishi Code

1. What does the OBDII code C101C mean on a Mitsubishi?

C101C indicates a fault in the Front Right Wheel Speed Sensor System, typically affecting the ABS or traction control systems.

2. What are the symptoms of code C101C on a Mitsubishi?

Common symptoms include an illuminated ABS or traction control warning light, loss of ABS functionality, or inconsistent braking performance.

3. What causes the C101C code to trigger?

The code can be triggered by a faulty front right wheel speed sensor, damaged wiring, corroded connectors, or a malfunctioning ABS module.

4. Can I drive my Mitsubishi with the C101C code?

Yes, but caution is advised. ABS and traction control may be disabled, reducing braking efficiency in slippery conditions.

5. How do I diagnose the C101C code?

Inspect the front right wheel speed sensor, wiring, and connectors for damage or corrosion. Use a multimeter to test the sensor's resistance and output signal.

6. How is the C101C code fixed?

Repairs may involve replacing the front right wheel speed sensor, repairing damaged wiring, cleaning corroded connectors, or updating/replacing the ABS module.

7. How much does it cost to fix the C101C code?

Costs vary but can range from $100 to $300 for a sensor replacement, with higher costs if additional repairs or ABS module replacement is needed.

8. Can a dirty wheel speed sensor cause the C101C code?

Yes, dirt or debris on the sensor or reluctor ring can interfere with signal transmission and trigger the code.

9. Will clearing the C101C code fix the problem?

No, clearing the code will only temporarily remove the warning light. The underlying issue must be resolved to prevent the code from returning.

10. How can I prevent the C101C code from occurring again?

Regularly inspect the wheel speed sensors, clean debris around them, and ensure wiring and connectors are in good condition.

Discuss the causes and fixes for C101C Mitsubishi OBDII Code

Code C101C Mitsubishi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play