C1014 Ford Code - Brake System Total Volume Balance
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Brake Booster Travel Sensor and Brake Fluid Pressure Sensor. Common causes include Faulty Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor harness is open or shorted, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C1014 Ford indicates Brake System Total Volume Balance.
- Common causes
- Common causes include Faulty Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor harness is open or shorted, Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C1014 Ford Description
What are the Possible Causes of the DTC C1014 Ford?
- Faulty Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor
- Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor harness is open or shorted
- Brake Booster Travel Sensor Or Brake Fluid Pressure Sensor circuit poor electrical connection
How to Fix the DTC C1014 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C1014 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C1014 Ford code?
Need more information on how to fix the C1014 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C1014 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C1014 Ford Code
What does the OBDII code C1014 mean for a Ford vehicle?
C1014 indicates a problem with the brake system's total volume balance, suggesting an imbalance in brake fluid distribution between the front and rear braking systems.
What symptoms might I experience if my vehicle has a C1014 code?
Common symptoms include an illuminated brake warning light, a spongy or unresponsive brake pedal, and potential issues with braking performance.
What could cause the C1014 code to trigger?
Causes can include low brake fluid levels, air in the brake lines, a malfunctioning brake master cylinder, or issues with the brake distribution module.
How can I check for low brake fluid levels?
Inspect the brake fluid reservoir under the hood; if the fluid is below the minimum mark, it's a sign that levels are low and should be topped up.
What should I do if I suspect air is in the brake lines?
You should bleed the brake lines to remove any trapped air, which can help restore proper brake function and balance.
Can a faulty brake master cylinder cause the C1014 code?
Yes, a malfunctioning brake master cylinder can disrupt fluid pressure and distribution, leading to an imbalance that triggers the C1014 code.
Is it safe to drive a vehicle with a C1014 code?
It is not recommended to drive the vehicle until the issue is resolved, as an imbalance in the brake system can compromise braking performance and safety.
What repair steps might a mechanic take to address the C1014 code?
A mechanic will typically inspect the brake fluid level, check for leaks, bleed the brake system, and test the brake master cylinder and distribution module for proper operation.
How can I clear the C1014 code after repairs?
After addressing the underlying issue, you can clear the code using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes, but it’s best to use a scanner for accuracy.
Discuss the causes and fixes for C1014 Ford OBDII Code
Code C1014 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
