C1011 FORD - Brake Pedal Feel Simulator Cut-Off Pressure Sensor Signal Incorrect After Event

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Brake Pedal Assembly
  • Brake Pedal Assembly harness is open or shorted
  • Brake Pedal Assembly circuit poor electrical connection

Tech notes

C1011:1C - Brake Pedal Feel Simulator Cut-Off Pressure Sensor: Circuit Voltage Out of Range
C1011:1F - Brake Pedal Feel Simulator Cut-Off Pressure Sensor: Circuit Intermittent
C1011:67 - Brake Pedal Feel Simulator Cut-Off Pressure Sensor: Signal Incorrect After Event

Possible symptoms

  • Anti-Lock Brake System (ABS) Warning Light ON
  • Engine Light ON (or Service Engine Soon Warning Light)

C1011 Ford Description

The brake pedal feel simulator cut-off solenoid valve and brake pedal feel simulator cut-off pressure sensor are located within the brake pedal feel simulator, which is attached to the brake pedal assembly.

The ABS module will apply a Pulse Width Modulated (PWM) ground signal to the brake pedal feel simulator cut-off solenoid valve to increase the resistance felt when the driver applies the brake pedal.

The ABS module uses input from the brake pedal feel simulator cut-off valve pressure sensor to verify that the brake pedal feel simulator cut-off solenoid valve is functioning properly. If the ABS module detects a fault with a brake system component that would adversely affect brake-by-wire operation, the module will remove power from the brake pedal feel simulator cut-off valve solenoid, relieving simulator fluid pressure.

The ABS module provides the brake pedal feel simulator cut-off pressure sensor a 5-volt reference voltage. The brake pedal feel simulator provides a signal voltage proportional to the fluid pressure in the brake pedal feel simulator cut-off device to the ABS module. The ABS module provides a signal return for brake pedal feel simulator cut-off pressure sensor.

OBDII Code C1011 Ford - Brake Pedal Feel Simulator Cut-Off Pressure Sensor Signal Incorrect After Event - AutoCodes.com

Need more help?

Get the C1011 Ford code diagnosed by a professional: Find a repair shop in your area

Related Information

C1011 FORD Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the C1011 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧