C100D Mercury Code - Brake Pedal Angle Sensor Circuit 1
Quick Answer
The Anti-Lock Brake System (ABS) Module monitors the Brake Pedal Angle Sensor Circuit 1. Common causes include Faulty Brake Pedal Angle Sensor, Brake Pedal Angle Sensor harness is open or shorted, Brake Pedal Angle Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- C100D Mercury indicates Brake Pedal Angle Sensor Circuit 1.
- Common causes
- Common causes include Faulty Brake Pedal Angle Sensor, Brake Pedal Angle Sensor harness is open or shorted, Brake Pedal Angle Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code C100D Mercury Description
What are the Possible Causes of the DTC C100D Mercury?
- Faulty Brake Pedal Angle Sensor
- Brake Pedal Angle Sensor harness is open or shorted
- Brake Pedal Angle Sensor circuit poor electrical connection
How to Fix the DTC C100D Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
C100D:22 Brake Pedal Angle Sensor Circuit 1: Signal Amplitude > Maximum
C100D:38 Brake Pedal Angle Sensor Circuit 1: Signal Frequency Incorrect
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the C100D Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the C100D Mercury code?
Need more information on how to fix the C100D Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the C100D Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about C100D Mercury Code
1. What are the common symptoms of OBDII code C100D in a Mercury related to the Brake Pedal Angle Sensor Circuit 1?
The common symptoms include issues with the brake lights, traction control system, and cruise control, as well as potential trouble with the transmission shifting properly.
2. What are the possible causes of OBDII code C100D in a Mercury indicating a problem with the Brake Pedal Angle Sensor Circuit 1?
Potential causes include a faulty brake pedal angle sensor, damaged wiring or connectors in the circuit, or a malfunctioning control module.
3. How can I diagnose the OBDII code C100D in my Mercury affecting the Brake Pedal Angle Sensor Circuit 1?
Diagnosis involves using a scan tool to read the code, checking the brake pedal angle sensor for proper operation, inspecting the wiring and connectors for damage, and testing the control module if necessary.
4. Is it safe to continue driving my Mercury with the OBDII code C100D related to the Brake Pedal Angle Sensor Circuit 1?
It is not recommended to drive the vehicle with this code active, as it can lead to potential safety hazards due to issues with brake light operation and other critical systems.
5. How can I repair OBDII code C100D in my Mercury indicating a fault in the Brake Pedal Angle Sensor Circuit 1?
Repair may involve replacing the brake pedal angle sensor, repairing or replacing damaged wiring or connectors, or reprogramming the control module, depending on the specific issue identified.
6. Can I reset the OBDII code C100D in my Mercury after fixing the problem with the Brake Pedal Angle Sensor Circuit 1?
Yes, once the underlying issue is resolved, you can use a scan tool to clear the code and reset the vehicle's system to see if the problem is successfully addressed.
7. Are there any DIY tips for troubleshooting OBDII code C100D in a Mercury related to the Brake Pedal Angle Sensor Circuit 1?
While basic checks like inspecting wiring connections can be done by DIY enthusiasts, diagnosing and repairing complex electronic issues may require professional expertise and specialized tools.
8. How much can I expect to pay for repairing OBDII code C100D in my Mercury linked to the Brake Pedal Angle Sensor Circuit 1?
The repair costs can vary depending on the specific cause of the issue, but generally, expenses may include parts and labor, with an estimated range from $100 to $500 or more.
9. Will the OBDII code C100D in my Mercury affecting the Brake Pedal Angle Sensor Circuit 1 cause the vehicle to fail an emissions test?
If left unresolved, this code may lead to a failed emissions test due to potential impacts on the vehicle's performance and emission control systems. It's advisable to address the issue promptly.
Discuss the causes and fixes for C100D Mercury OBDII Code
Code C100D Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
